From: Dan C (cdan2154@gmail.com)
Date: Sun May 27 2007 - 09:41:22 ART
Hi Ovidiu,
In sparse mode over FR you may need to enable ip pim nbma-mode on the
serial interface of the hub router. Also on the spoke try to assign one more
interface to the pim process. If you still have problems just past in a show
ip mroute.
cheers,
Dan
On 5/27/07, Ovidiu Neghina <o.neghina@gmail.com> wrote:
>
> Hi dear all
> I have a situation where a router R1 has 2 point-to-point frame-relay
> interfaces towards another 2 routers. One of them is RP and Mapping agent
> (R2) for 224.1.1.1/32 .
> The problem that I have is R1 does not forward the mapping information
> towards the other router R3 , i.e. does not forward the 224.0.1.40 on the
> point-to-point link.
> every router is configured with sparse-mode on the interfaces.
> Is this normal ? Shouldn't packets destined to 224.0.1.40 be sent
> everywhere interface/subinterface where it has a pim neighbor ?
>
> Thank you
> Ovidiu
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:22 ART