From: John Jones (acer0001@gmail.com)
Date: Sat May 26 2007 - 21:23:06 ART
I used a Avocent serial port concentrator for a while before purchasing a
2511. After assigning and IP address to it, each physical port was
designated by a telnet TCP port number; physical port 1 was referenced to
tcp port 2001 and so forth. It used a rollover cable from its rj-45 "serial"
port to the Cisco console port. Worked pretty well once you got used to
having lots to telnet windows open or using it with tabbed SecuerCRT.
John
On 5/26/07, Loc Pham <ccie17030@yahoo.com> wrote:
>
> John,
> I used a PCI serial ( digi-card ) but 2511 is much
> cheaper .
> Back then, usb hub is simply ... non existing ;-)
> HTH,
> lP
> --- johngibson1541@yahoo.com wrote:
>
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
>
> ____________________________________________________________________________________Choose
> the right car based on your needs. Check out Yahoo! Autos new Car Finder
> tool.
> http://autos.yahoo.com/carfinder/
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:22 ART