From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sat May 26 2007 - 16:19:31 ART
"ip telnet quiet" See example below:
Rack1SW1#telnet 1.1.1.1
Trying 1.1.1.1 ... Open
User Access Verification
Password:
Rack1SW1>exit
[Connection to 1.1.1.1 closed by foreign host]
Rack1SW1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Rack1SW1(config)#ip telnet quiet
Rack1SW1(config)#^Z
Rack1SW1#telnet 1.1.1.1
User Access Verification
Password:
HTH,
Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
On 5/26/07 11:47 AM, "nhatphuc" <nhatphuc@gmail.com> wrote:
> Hi Group,
>
> What command can I use to disable message "Trying ....Open" when telnetting?
>
> Thanks
>
> Phuc
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:22 ART