From: Laurean Stefenel (laureans@hotmail.com)
Date: Fri May 25 2007 - 23:22:15 ART
Thanks for you answers,
I will take the time to study this, I am sure is not going to hurt...
Regards
Laurean
> Date: Fri, 25 May 2007 12:17:06 -0400> From: pahujat@gmail.com> To:
narbikk@gmail.com> Subject: Re: IPv6 Routing protocols authentication> CC:
laureans@hotmail.com; ccielab@groupstudy.com> > Laurean,> Just like OSPF
authentication which can be enabled on an> interface or for the whole area.
IPSec for OSPF for IPv6 can be configured> on an interface or on an OSPF area
as well . For higher security, users> should configure a different policy on
each interface configured with IPSec.> > > Te following link would give you
examples for both types (Link & Area).> >
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/ipv6_
c/sa_ospf3.htm> > Thanks,> Tarun Pahuja>
CCIE#7707(R&S,Security,SP,Voice,Storage),CCSI> > > On 5/25/07, Narbik
Kocharians <narbikk@gmail.com> wrote:> >> > It's not that big of a deal to
configure authentication for the routing> > protocols in IPV6, note its much
simpler than configuring IPSec VPNs, i> > would recommend knowing it. By the
way IPSec VPNs are now part of the> > written test.> >> > interface
Ethernet0/0> > ipv6 enable> > ipv6 ospf 1 area 0> > ipv6 ospf authentication
ipsec spi 500 md5> > 1234567890ABCDEF1234567890ABCDEF> >> >> > ipv6 router
ospf 1> > router-id 11.11.11.1> > area 0 authentication ipsec spi 1000 md5
1234567890ABCDEF1234567890ABCDEF> >> >> > On 5/25/07, Tarun Pahuja
<pahujat@gmail.com> wrote:> >> > > Laurean,> > > RIPng & OSPF v3 does not
include its own authentication> > > mechanism. It is assumed that if
authentication and/or encryption are> > > needed, they will be provided using
the standard IPSec features defined> > > for> > > IPv6 at the IP layer. This
is more efficient than having individual> > > protocols like RIPng perform
authentication. Here is a link on how to> > > configue authentication for OSPF
v3.> > >> > >
http://cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09
186a0080573b9c.html#wp1106263> > >> > >> > > Hope this Helps.> > >> > > Tarun
Pahuja> > > CCIE#7707(R&S,Security,SP,Voice,Stoage)> > >> > >> > >> > >> > >
On 5/25/07, Laurean Stefenel <laureans@hotmail.com> wrote:> > > >> > > > Hi
Group,> > > >> > > > I have a question regarding R&S Lab requirements for
IPv6:> > > > Authentication for RIPng and OSPFv3 is not part of the protocol>
> > anymore> > > > and is> > > > using IPv6 IPSec; IPSec is not in the LAB
Blue print, does anyone know> > > if> > > > routing protocols authentication
is a requirement for IPv6?> > > >> > > > Thanks> > > > Laurean> > > >> > > >>
> > _______________________________________________________________________> >
> > Subscription information may be found at:> > > >
http://www.groupstudy.com/list/CCIELab.html> > >> > >
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:22 ART