From: Ryan (ryan95842@gmail.com)
Date: Wed May 23 2007 - 21:46:04 ART
From SecureCRT
1) Click FILE
2) Click 'Raw log session'
3) Type in a file name (i.e. R1) and click OK
From the router prompt
router# ter len 0
router# sh run
4) Click FILE and uncheck 'Raw log session'
Repeat for each router/switch. It's a good idea to edit each file in notepad
and remove the 'ter len 0' and 'sh run'
Later, when you want to load it up again:
1) From the new R1 with no config...click TRANSFER (from the menu bar of
SecureCRT)
2) Select 'Send ASCII'
3) browse for your previously saved R1 config, click OK
4) Enjoy!
-Ryan
On 5/23/07, Ccie Girl <ccie.girl.2007@gmail.com> wrote:
>
> I'm utilising rental rack with securecrt.
> Does anyone have strategy or ideas on how to save configurations from rack
> rental .. so that lab work can be resumed the next time rack is rented ?
>
> Thanks in advance.
>
> ~ Sonia R.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:22 ART