From: Hulbert, Jerald (Jerry.Hulbert@flukenetworks.com)
Date: Tue May 22 2007 - 17:24:48 ART
Do you have any max consumption configurations set on the port or
globally?
Try using some debug ilpower (events|controller|port|police|etc)
commands.
What version are you running on your 3560? 12.2(37)?
Jerry
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
mohammed shoeb ahmed
Sent: Tuesday, May 22, 2007 1:45 PM
To: Cisco certification; cisco@groupstudy.com
Subject: 3560 POE problem
Hi group,
When I connect cisco phone to 3560 POE switch it give me this messages:
10w2d: %ILPOWER-7-DETECT: Interface Fa0/15: Power Device detected: Cisco
PD
10w2d: %ILPOWER-5-IEEE_DISCONNECT: Interface Fa0/15: PD removed
10w2d: %ILPOWER-7-DETECT: Interface Fa0/15: Power Device detected: Cisco
PD
10w2d: %ILPOWER-5-IEEE_DISCONNECT: Interface Fa0/15: PD removed
not able to figure out why, your help will be appreciated.
-- Best Regards,Mohammed Shoeb Ahmed
Consultant, SCS, Riyadh
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:21 ART