From: Edison Ortiz (edisonmortiz@gmail.com)
Date: Tue May 22 2007 - 10:51:34 ART
For step 1, I go with
sh run | i ip address
Copy and Paste onto notepad and search & replace 'no ip address' with ' ' -
search & replace 'ip address' with ' ' - search & replace '255.255.255.0'
with ' '.
The whole process takes me under 2 minutes.
__
Edison Ortiz
(Routing & Switching, CCIE # 17943)
----- Original Message -----
From: "To Be CCIE" <ccierocks@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Tuesday, May 22, 2007 2:58 AM
Subject: scripts
> Group,
>
> I'm wondering if people can share the best way to run the tcl scripts to
> do
> the ping test. This is what I have been doing so far:
>
>
> 1) I go the the router/switch through the terminal server and enter this
> command:
>
> sh ip int brie | ex unass
>
> 2) I copy all the ip address assigned in the column while holding the ALT
> key and paste them into a text document for each router and switch.
>
> 3) To get in to tcl script I enter "tclsh"
>
> 4) Copy and paste all the address from the text document
>
> foreach address {
>
> 155.32.1.1
>
> 155.32.11.1
>
> 155.32.12.1
>
> 155.32.2.2
>
> 155.32.3.3
>
> } {ping $address}
>
> 5) Enter "exit" to get out the tcl prompt.
>
> I'm wondering if people can comment if this is the most effective way to
> do
> it in the CCIE exam?
>
> Thanks,
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:21 ART