From: WorkerBee (ciscobee@gmail.com)
Date: Mon May 21 2007 - 10:19:33 ART
It maybe coming from a stray Frame Relay mapping. Check your frame-relay map
if you have it enabled.
On 5/21/07, Scott Morris <smorris@ipexpert.com> wrote:
> If your RID's all check out fine (a common error), then I'd start checking
> my virtual links. "sh ip o v" to start, and "sh ip o n" to make sure I have
> a neighbor associated with each virtual link (e.g. it's really working).
>
> The next thing I'd look at if all is well there, is to go back to my
> switches and make sure I haven't accidently put two different vlans from my
> diagram into the same vlan number in the switch.
>
> HTH,
>
>
> Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
> #153, CISSP, et al.
> CCSI/JNCI-M/JNCI-J
> IPexpert VP - Curriculum Development
> IPexpert Sr. Technical Instructor
> smorris@ipexpert.com
> http://www.ipexpert.com
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of To
> Be CCIE
> Sent: Monday, May 21, 2007 1:29 AM
> To: Vishal Patel
> Cc: Cisco certification
> Subject: Re: OSPF Error
>
> Thanks for the reply. I did try clearing the ospf process and reload the
> routers.... but it keep coming back :(
>
> On 5/20/07, Vishal Patel <vpatel@accessproviders.com.au> wrote:
> >
> >
> >
> > May be you have changed the ID and not restarted the ospf process.
> >
> > Just restart the ospf process or may be reload your routers.
> >
> > HTH
> >
> > Vishal
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > Of To Be CCIE
> > Sent: Monday, 21 May 2007 3:21 PM
> > To: Cisco certification
> > Subject: OSPF Error
> >
> > Group,
> >
> > I keep getting the following message on my console:
> >
> > *May 21 05:46:39.259: %OSPF-4-ERRRCV: Received invalid packet:
> > mismatch area ID, from backbone area must be virtual-link but not
> > found from 155.32.13.1 , Serial0/0/0
> >
> > I haven't configured any virtual link.
> > I checked all the Area IDs of different areas and they are correct.
> > Everything is working fine.... I ran my scripts and I can ping all the
> > interfaces.
> >
> > Any idea, what might be causing it?
> >
> > Thanks,
> > Mike
> >
> > ______________________________________________________________________
> > _ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:21 ART