From: Darby Weaver (darbyweaver@yahoo.com)
Date: Thu May 17 2007 - 16:41:09 ART
Gotta love Dynamips...
Seems I recall someone talking about mentioning
something about enabling aaa and locking themselves
from the console...
Gotta love it.
--- Brian Dennis <bdennis@internetworkexpert.com>
wrote:
> It'll be easy to tell if the configurations don't
> come back because your
> heart rate will skyrocket! ;-)
>
> As a side note one of the proctors was telling me
> about someone who failed
> the lab recently because they didn't know how to get
> into rommon mode and
> bypass the configuration.
>
> --
>
> Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
> bdennis@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
>
>
> On 5/17/07 11:33 AM, "Brad Ellis"
> <brad@ccbootcamp.com> wrote:
>
> > Also, don't forget to double check your config
> registers...make sure they
> > are 0x2102 on your routers! :)
> >
> > thanks,
> > Brad Ellis
> > CCIE#5796 (R&S / Security)
> > CCSI#30482
> > Network Learning Inc - A Cisco Sponsored
> Organization (SO)
> > YES! We take Cisco Learning credits!
> > brad@ccbootcamp.com
> > www.ccbootcamp.com (Cisco Training and Advanced
> Technology Rental Racks)
> > Voice: 702-968-5100
> > FAX: 702-446-8012
> > ----- Original Message -----
> > From: "Brian Dennis"
> <bdennis@internetworkexpert.com>
> > To: "cisco monster" <cisco.monster@gmail.com>;
> <ccielab@groupstudy.com>
> > Sent: Thursday, May 17, 2007 11:20 AM
> > Subject: Re: in Lab , reload !!
> >
> >
> > Look at it this way. If your configurations
> (solutions) will not survive a
> > reload you more than likely won't pass anyways.
> Your configurations should
> > be able to survive a reload.
>
>
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:21 ART