From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Thu May 17 2007 - 15:43:56 ART
It'll be easy to tell if the configurations don't come back because your
heart rate will skyrocket! ;-)
As a side note one of the proctors was telling me about someone who failed
the lab recently because they didn't know how to get into rommon mode and
bypass the configuration.
--Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP) bdennis@internetworkexpert.com Internetwork Expert, Inc. http://www.InternetworkExpert.com Toll Free: 877-224-8987 Direct: 775-745-6404 (Outside the US and Canada)
On 5/17/07 11:33 AM, "Brad Ellis" <brad@ccbootcamp.com> wrote:
> Also, don't forget to double check your config registers...make sure they > are 0x2102 on your routers! :) > > thanks, > Brad Ellis > CCIE#5796 (R&S / Security) > CCSI#30482 > Network Learning Inc - A Cisco Sponsored Organization (SO) > YES! We take Cisco Learning credits! > brad@ccbootcamp.com > www.ccbootcamp.com (Cisco Training and Advanced Technology Rental Racks) > Voice: 702-968-5100 > FAX: 702-446-8012 > ----- Original Message ----- > From: "Brian Dennis" <bdennis@internetworkexpert.com> > To: "cisco monster" <cisco.monster@gmail.com>; <ccielab@groupstudy.com> > Sent: Thursday, May 17, 2007 11:20 AM > Subject: Re: in Lab , reload !! > > > Look at it this way. If your configurations (solutions) will not survive a > reload you more than likely won't pass anyways. Your configurations should > be able to survive a reload.
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:21 ART