From: Jose James (jose.james@trafigura.com)
Date: Thu May 17 2007 - 05:25:33 ART
Cheers for that, that was exactly the issue.
much appreciated
________________________________
From: tokunbo iginla [mailto:tokunbo.iginla@gmail.com]
Sent: 17 May 2007 08:31
To: ccielab@groupstudy.com
Cc: Jose James; Muhabat
Subject: Re: Dynamips Frame-relay issue
I had similar challenges when i first tried multiserver , in my
situation the two dynamips servers were functioning independently but i
couldnt interconnect between devices defined on either servers, however
i could interconnect devices defined on the same dynamips servers. I
localised the problem to the way i defined the system in the .net file.
I used localhost instead of the ip address of the machine. Since I
changed this my multiserver has been fine.
Tokunbo Iginla
On 5/17/07, Muhabat <muhabat@gmail.com> wrote:
Hi there,
I have not seen any such issue with Dynamips, but if you are
using FRSW
(Dynamips way of Frame Relay) then try to use router based frame
relay. I
hope it will solve the issue.
HTH
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com ] On
Behalf Of Jose
James
Sent: Wednesday, May 16, 2007 6:59 PM
To: ccielab@groupstudy.com
Subject: Dynamips Frame-relay issue
Hi All,
Is anybody running Dynamips with two servers? Im running one
process on
each server and it all seems to work perfectly and Im even able
to start
devices on the second device. The main reason for running with
two
servers was due to my frustration to performance when I started
loading
up the routers.
Im unable to get a simple frame-relay point to point working,
seems like
there is a issue with the FRSW. But when I run both processes on
the
same server with the exact same config it works no problem. Is
anybody
aware of any issues cus I would really like to get this running
over
multiple servers.
Im using the IEver4 dynamips sample labs.
Thanks in advance
___________________________________________________
This email and any attachments are confidential and access
to this email or attachment by anyone other than the addressee
is unauthorised. If you are not the intended recipient please
notify the sender and delete the email including any
attachments.
You must not disclose or distribute any of the contents to any
other person. Personal views or opinions are solely those of the
author and not of Trafigura. Trafigura does not guarantee that
the integrity of this communication has been maintained nor
that the communication is free of viruses, interceptions or
interference. By communicating with anyone at Trafigura by
email, you consent to the monitoring or interception of such
email by Trafigura in accordance with its internal policies.
Unless otherwise stated, any pricing information given in this
message is indicative only, is subject to change and does not
constitute an offer to deal at any price quoted.
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:21 ART