From: shiran guez (shiranp3@gmail.com)
Date: Wed May 16 2007 - 05:42:58 ART
Hi
I would like to get an advice regarding IP2IP GW
I am using Cisco 2821 with IOS c2800nm-adventerprisek9_ivs-mz.124-11.T.bin
Task: preforming calls from one provider to another trough the GW
Reason: Security an hidden topology
Problem: calls are with shorter duration then what spouse to be
Config:
voice service voip
address-hiding
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco
h323
emptycapability
ip circuit max-calls 400
ip circuit default only
sip
!
voice class media 1
media flow-through
!
!
dial-peer voice 100 voip
destination-pattern .T
voice-class media 1
incoming called-number .
fax-relay ecm disable
fax rate 14400
!
dial-peer voice 101 voip
destination-pattern .T
voice-class media 1
session target ipv4:<Destination provider IP>
fax-relay ecm disable
fax rate 14400
!
I will appriciate if some one have a idea what can cause the short duration
problem.
note: hangup call is 16 normal, there is no bad voice problem!
--Shiran Guez MCSE CCNP NCE1 http://cciep3.blogspot.com
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:21 ART