From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Tue May 15 2007 - 14:16:33 ART
Can you send me the output of the following commands from R1:
show ip route
show ip mroute
show ip mroute count
show ip pim rp mapping
--Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP) bdennis@internetworkexpert.com Internetwork Expert, Inc. http://www.InternetworkExpert.com Toll Free: 877-224-8987 Direct: 775-745-6404 (Outside the US and Canada)
On 5/14/07 10:20 PM, "Benedict Munyao" <bmunyao@gmail.com> wrote:
> Hi Everyone > > The above task appears straight forward enough, requiring a mapping agent (R3) > to filter the RP announce messages from two RPs (R1,R2). Even and odd group > addresses were to be mapped to R1and R2 respectively. Both RP are directly > connected to the mapping agent. > > On completing the task, I got RP mappings on R2 (over MLPoFR link) but not on > R1 (over HDLC link). A reload of R1 appeared to resolve the problem for a > short while, before they disappeared again. My config was identical to the > answer on the solution guide. > > Has anyone on the list come across this problem, and what was the solution? > > Thanks in advance. > > Benedict Munyao > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:21 ART