From: Josh (shmokin@gmail.com)
Date: Mon May 14 2007 - 17:15:48 ART
On router 3, under router rip, if you remove *passive-interface default*,
it transfers the 141.1.0.0/24 to R6 and then it works.
On 5/13/07, lalit gupta <lalit.tech@gmail.com> wrote:
>
> Hi Nitin
>
> I m also facing the same problem, (141.1.0.0/24 OSPF NETWORK connected
> with
> other 2 routers speaking ospf only in broadcast domain) R2 -----------
> connected with R3 through frame-relay network. In this R3 router ,
> ospf/rip
> is running, ospf network facing towards FR is (141.1.123.0/24)- and rip
> network facing another rip speaking router is---(141.1.36.0)(RIP
> PROTOCOL)
> ----R6
>
>
> on R3 , ROUTES are there in ospf table as it should be and it is there in
> rip database table as well as it should be ..
>
> But routes are not going towards RIP speaking router R6.
>
> Note :- only 141.1.0.0/24 is not coming in rip routing table as other
> networks are being installed in routing table of R6 .
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:21 ART