From: Avner Izhar (aizhar@ccbootcamp.com)
Date: Sun May 13 2007 - 16:24:35 ART
In general you would define the following:
Switch(config)# mls qos srr-queue output cos-map queue 1 threshold 3 6 7
Switch(config)# mls qos srr-queue output cos-map queue 2 threshold 3 4 5
Switch(config)# mls qos srr-queue output cos-map queue 3 threshold 3 2 3
Switch(config)# mls qos srr-queue output cos-map queue 4 threshold 3 1 0
More reading material can be found in:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12225see/scg/swqo
s.htm
Regards,
Avner Izhar, CCIE #15999 (Voice)
Network Learning Inc.
www.ccbootcamp.com
________________________________
From: nobody@groupstudy.com on behalf of To Be CCIE
Sent: Sun 5/13/2007 12:59 AM
To: ccielab@groupstudy.com
Subject: 3560 QOS
Hello,
I only have 3560 switches in my pod and I'm trying to configure QOS with
different Cos values:
Queue 1: Cos (6,7)
Queue 2: Cos (4,5)
Queue 3: Cos (2,3)
Queue 4: Cos (0,1)
Any suggestion how this could possibly be implemented on 3560?
Thanks,
Mike
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:20 ART