From: Dan C (cdan2154@gmail.com)
Date: Sat May 12 2007 - 10:50:36 ART
Hi Rob,
Same issue here, it looks like the command bridge <group no> acquire is not
supported on 3550/60 platforms as per this document :
http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_guide_chapter09186a00805a7056.html
Cheers,
Dan
On 5/12/07, Rob McDonald <robmexpert@gmail.com> wrote:
>
> Hello group,
>
> I'm trying to configure fallback bridging filtering while making dynamic
> mac
> address not use fallback bridging. It's not working as I still see the
> dynamic entries:
>
>
> bridge 1 protocol vlan-bridge
> no bridge 1 acquire
> bridge 1 address 0019.aa6f.4d11 forward Vlan10
>
> int Vlan 10
> ip address 155.10.10.7 255.255.255.0
> bridge-group 1
>
> interface FastEthernet0/4
> no switchport
> ip address 150.10.9.7 255.255.255.0
> bridge-group 1
>
>
> I have cleared the arp and bridge group:
>
> clear arp
> clear bridge 1
>
>
> Still, I'm seeing the dynamic entries. Any suggestion?
>
> Thanks,
> Rob
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:20 ART