dot1x & Guest VLAN

From: Rob McDonald (robmexpert@gmail.com)
Date: Wed May 09 2007 - 05:23:49 ART

Next message: jdocio.groupstudy: "Re: Eigrp unequal cost load balancing route does not show in"
Previous message: Alexei Monastyrnyi: "Re: RIP: Just curious"
Next in thread: Edison Ortiz: "Re: dot1x & Guest VLAN"
Maybe reply: Edison Ortiz: "Re: dot1x & Guest VLAN"
Maybe reply: Rob McDonald: "Re: dot1x & Guest VLAN"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello group,

I'm trying to set-up 802.1x based guest vlan authentication using a radius
server @ 100.100.1.100 and password CCIE. Is this the right way to achieve
this:

aaa new-model

aaa authentication dot1x default group radius

radius-server host 100.100.1.100

radius-server key CCIE

dot1x guest-vlan supplicant

dot1x system-auth-control

interface range fa0/10-13

switchport-mode access

dot1x port-control auto

dot1x guest-vlan 100

Also is it mandatory to use the command "dot1x guest-vlan supplicant"?

Thanks,

Rob

Next message: jdocio.groupstudy: "Re: Eigrp unequal cost load balancing route does not show in"
Previous message: Alexei Monastyrnyi: "Re: RIP: Just curious"
Next in thread: Edison Ortiz: "Re: dot1x & Guest VLAN"
Maybe reply: Edison Ortiz: "Re: dot1x & Guest VLAN"
Maybe reply: Rob McDonald: "Re: dot1x & Guest VLAN"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:20 ART