From: Engin (engin@sekom.com.tr)
Date: Tue May 08 2007 - 03:48:01 ART
Hi everybody,
I have a question regarding to that case. Task instructs that 2 requirement
must be provided:
1.IPv6 traffic from VLAN17 going to BB1 is first sent to R4 and then R6
2.Traffic from BB1 back to R1 should be sent directly from R6 to R1.
The solution book says that use a distribute list of:
R1:
ipv6 router rip RIPng
distribute-list prefix-list NONE in tunnel16
ipv6 prefix-list NONE seq 5 deny ::/0 le 128
But is not that mean that it will no incoming traffic traffic on the
tunnel16 interface? But task says that traffic from BB1 back to R1 should be
sent directly from R6 to R1.
Please claify me...
}\|UYARI / NOTIFICATION:
Bu e-posta ve ekleri sadece gvnderilen adres sahiplerine aittir. Bu mesaj}n
yanl}~l}kla taraf}n}za ula~m}~ olmas} halinde, l|tfen gvndericiye derhal
bilgi veriniz ve mesaj} sisteminizden siliniz. Sekom bu mesaj}n igeripi
ve/veya ekleri ile ilgili olarak hukuksal higbir sorumluluk kabul etmez.
Mesaj igeripinde gizli bilgiler bulunabilir, bu nedenle mesaj} ba~kalar}na
iletmeden ya da gopaltmadan vnce gvnderenden izin alman}z vnerilir. Gvnderen
taraf hata veya unutmalardan sorumluluk kabul etmez.
The information contained in this e-mail and any files transmitted with it
are intended solely for the use of the individual or entity to whom they are
addressed. If you received this message in error, please immediately notify
the sender and delete it from your system. Sekom doesn't accept any legal
responsibility for the contents and/or attachments of this message. This
message may contain confidential information, because of that reason before
forwarding or copying this message it is recommended to take permission of
sender. The sender does not accept liability for any errors or omissions.
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:20 ART