CISCO 2610 routers for sale - good for LAB practices

From: Mathew (mathewfer@gmail.com)
Date: Mon May 07 2007 - 04:34:55 ART

• Next message: Hafiz Ahmed: "Reg OFPF virtual link"
• Previous message: Scott Morris: "RE: Awesome Bootcamp"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi GS

I have got 4 CISCO 2610 routers with the below menstioned modules for
sale. All 4 routers are in good working condition & available in
Sydney.

CISCO 2610 with 1WIC2T - 3 routers
CISCO 2610 with 2WIC2T - 1 router
CISCO NM-16A - 1 module
CISCO Cables DCE-DTE - 10
CISCO Cables NM-16A - 2

I have attached below the output of "show ver", show diag" etc for more details.

If anybody intrested, please unicast your offers.

R1:

sho ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.2(15)T15, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Thu 03-Mar-05 03:28 by hqluong
Image text-base: 0x80008098, data-base: 0x81960D40

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-J1S3-M), Version 12.2(15)T15, RELEASE SOFTWARE (fc1)

Router uptime is 8 minutes
System returned to ROM by power-on
System image file is "flash:c2600-j1s3-mz.122-15.T15.bin"

cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes
of memory.
Processor board ID JAD05090GQQ (1222274526)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
16 terminal line(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Router#
Router#sho du iag
Slot 0:
        C2610 1E Mainboard Port adapter, 3 ports
        Port adapter is analyzed
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:
        Hardware Revision : 2.3
        PCB Serial Number : JAD05090GQQ (1222274526)
        Part Number : 73-2839-13
        RMA History : 00
        RMA Number : 0-0-0-0
        Board Revision : C0
        Deviation Number : 0-0
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF 40 00 91 41 02 03 C1 18 4A 41 44 30 35 30
          0x10: 39 30 47 51 51 20 28 31 32 32 32 32 37 34 35 32
          0x20: 36 29 82 49 0B 17 0D 04 00 81 00 00 00 00 42 43
          0x30: 30 80 00 00 00 00 FF FF FF FF FF FF FF FF FF FF
          0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

        WIC Slot 0:
        Serial 2T (12in1)
        Hardware revision 1.0 Board revision C0
        Serial number 20510059 Part number 800-03181-01
        Test history 0x0 RMA number 00-00-00
        Connector type PCI
        EEPROM format version 1
        EEPROM contents (hex):
          0x20: 01 12 01 00 01 38 F5 6B 50 0C 6D 01 00 00 00 00
          0x30: 60 00 00 00 00 05 19 00 FF FF FF FF FF FF FF FF

Slot 1:
        Async Port adapter, 16 ports
        Port adapter is analyzed
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:
        Hardware revision 0.1 Board revision D0
        Serial number 20587468 Part number 800-02244-05
        FRU Part Number: NM-16A=

        Test history 0x0 RMA number 00-00-00
        EEPROM format version 1
        EEPROM contents (hex):
          0x20: 01 62 00 01 01 3A 23 CC 50 08 C4 05 00 00 00 00
          0x30: 68 00 00 00 00 06 13 00 FF FF FF FF FF FF FF FF

Router#
Router#sho runn
Building configuration...

Current configuration : 704 bytes
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
logging queue-limit 100
!
ip subnet-zero
!
!
!
mpls ldp logging neighbor-changes
!
!
!
!
!
!
!
!
!
no voice hpi capture buffer
no voice hpi capture destination
!
!
mta receive maximum-recipients 0
!
!
!
!
interface Ethernet0/0
 no ip address
 shutdown
 half-duplex
!
interface Serial0/0
 no ip address
 shutdown
 no fair-queue
!
interface Serial0/1
 no ip address
 shutdown
!
ip http server
ip classless
!
!
!
!
!
call rsvp-sync
!
!
mgcp profile default
!
dial-peer cor custom
!
!
!
!
line con 0
line 33 48
 flush-at-activation
line aux 0
line vty 0 4
!
!
end

Router#
Router#

R2:

sho ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.2(15)T15, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Thu 03-Mar-05 03:28 by hqluong
Image text-base: 0x80008098, data-base: 0x81960D40

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-J1S3-M), Version 12.2(15)T15, RELEASE SOFTWARE (fc1)

Router uptime is 5 minutes
System returned to ROM by power-on
System image file is "flash:c2600-j1s3-mz.122-15.T15.bin"

cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes
of memory.
Processor board ID JAD05090B03 (1308510850)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
4 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Router#
Router#sho diag
Slot 0:
        C2610 1E Mainboard Port adapter, 5 ports
        Port adapter is analyzed
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:
        Hardware Revision : 2.3
        PCB Serial Number : JAD05090B03 (1308510850)
        Part Number : 73-2839-13
        RMA History : 00
        RMA Number : 0-0-0-0
        Board Revision : C0
        Deviation Number : 0-0
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF 40 00 91 41 02 03 C1 18 4A 41 44 30 35 30
          0x10: 39 30 42 30 33 20 28 31 33 30 38 35 31 30 38 35
          0x20: 30 29 82 49 0B 17 0D 04 00 81 00 00 00 00 42 43
          0x30: 30 80 00 00 00 00 FF FF FF FF FF FF FF FF FF FF
          0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

        WIC Slot 0:
        Serial 2T (12in1)
        Hardware revision 0.0 Board revision 70
        Serial number 0 Part number 00-0000-00
        Test history 0x0 RMA number 00-00-00
        Connector type PCI
        EEPROM format version 0
        EEPROM contents (hex):
          0x20: 00 12 00 00 00 00 00 00 00 00 00 00 00 00 00 00
          0x30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

        WIC Slot 1:
        Serial 2T (12in1)
        Hardware revision 0.0 Board revision 70
        Serial number 0 Part number 00-0000-00
        Test history 0x0 RMA number 00-00-00
        Connector type PCI
        EEPROM format version 0
        EEPROM contents (hex):
          0x20: 00 12 00 00 00 00 00 00 00 00 00 00 00 00 00 00
          0x30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Router#
Router#sho runn
Building configuration...

Current configuration : 766 bytes
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
logging queue-limit 100
!
ip subnet-zero
!
!
!
mpls ldp logging neighbor-changes
!
!
!
!
!
!
!
!
!
no voice hpi capture buffer
no voice hpi capture destination
!
!
mta receive maximum-recipients 0
!
!
!
!
interface Ethernet0/0
 no ip address
 shutdown
 half-duplex
!
interface Serial0/0
 no ip address
 shutdown
 no fair-queue
!
interface Serial0/1
 no ip address
 shutdown
!
interface Serial0/2
 no ip address
 shutdown
!
interface Serial0/3
 no ip address
 shutdown
!
ip http server
ip classless
!
!
!
!
!
call rsvp-sync
!
!
mgcp profile default
!
dial-peer cor custom
!
!
!
!
line con 0
line aux 0
line vty 0 4
!
!
end

Router#

R3:

sho ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.2(15)T15, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Thu 03-Mar-05 03:28 by hqluong
Image text-base: 0x80008098, data-base: 0x81960D40

ROM: System Bootstrap, Version 11.3(2)XA3, PLATFORM SPECIFIC RELEASE
SOFTWARE (fc1)
ROM: C2600 Software (C2600-J1S3-M), Version 12.2(15)T15, RELEASE SOFTWARE (fc1)

Router uptime is 1 minute
System returned to ROM by power-on
System image file is "flash:c2600-j1s3-mz.122-15.T15.bin"

cisco 2610 (MPC860) processor (revision 0x202) with 61440K/4096K bytes
of memory.
Processor board ID JAB0307026W (566122020)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Router#
Router#sho diag
Slot 0:
        C2610 1E Mainboard Port adapter, 3 ports
        Port adapter is analyzed
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:
        Hardware Revision : 2.2
        PCB Serial Number : JAB0307026W (566122020)
        Part Number : 73-2839-09
        RMA History : 06
        RMA Number : 0-0-0-0
        Board Revision : A0
        Deviation Number : 0-216
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF 40 00 91 41 02 02 C1 17 4A 41 42 30 33 30
          0x10: 37 30 32 36 57 20 28 35 36 36 31 32 32 30 32 30
          0x20: 29 82 49 0B 17 09 04 06 81 00 00 00 00 42 41 30
          0x30: 80 00 00 00 D8 FF FF FF FF FF FF FF FF FF FF FF
          0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

        WIC Slot 0:
        Serial 2T (12in1)
        Hardware revision 1.0 Board revision A0
        Serial number 8321418 Part number 800-03181-01
        Test history 0x0 RMA number 00-00-00
        Connector type PCI
        EEPROM format version 1
        EEPROM contents (hex):
          0x20: 01 12 01 00 00 7E F9 8A 50 0C 6D 01 00 00 00 00
          0x30: 50 00 00 00 98 05 15 17 FF FF FF FF FF FF FF FF

Router#
Router#sho runn
Building configuration...

Current configuration : 657 bytes
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
logging queue-limit 100
!
ip subnet-zero
!
!
!
mpls ldp logging neighbor-changes
!
!
!
!
!
!
!
!
!
no voice hpi capture buffer
no voice hpi capture destination
!
!
mta receive maximum-recipients 0
!
!
!
!
interface Ethernet0/0
 no ip address
 shutdown
 half-duplex
!
interface Serial0/0
 no ip address
 shutdown
!
interface Serial0/1
 no ip address
 shutdown
!
ip http server
ip classless
!
!
!
!
!
call rsvp-sync
!
!
mgcp profile default
!
dial-peer cor custom
!
!
!
!
line con 0
line aux 0
line vty 0 4
!
!
end

Router#

R4:

sho ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.2(15)T15, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Thu 03-Mar-05 03:28 by hqluong
Image text-base: 0x80008098, data-base: 0x81960D40

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-J1S3-M), Version 12.2(15)T15, RELEASE SOFTWARE (fc1)

Router uptime is 0 minutes
System returned to ROM by power-on
System image file is "flash:c2600-j1s3-mz.122-15.T15.bin"

cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes
of memory.
Processor board ID JAD041902Q5 (1331924925)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Router#
Router#sho du iag
Slot 0:
        C2610 1E Mainboard Port adapter, 3 ports
        Port adapter is analyzed
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:
        Hardware Revision : 2.3
        PCB Serial Number : JAD041902Q5 (1331924925)
        Part Number : 73-2839-13
        RMA History : 00
        RMA Number : 0-0-0-0
        Board Revision : C0
        Deviation Number : 0-22418
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF 40 00 91 41 02 03 C1 18 4A 41 44 30 34 31
          0x10: 39 30 32 51 35 20 28 31 33 33 31 39 32 34 39 32
          0x20: 35 29 82 49 0B 17 0D 04 00 81 00 00 00 00 42 43
          0x30: 30 80 00 00 57 92 FF FF FF FF FF FF FF FF FF FF
          0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

        WIC Slot 0:
        Serial 2T (12in1)
        Hardware revision 1.0 Board revision C0
        Serial number 20021908 Part number 800-03181-01
        Test history 0x0 RMA number 00-00-00
        Connector type PCI
        EEPROM format version 1
        EEPROM contents (hex):
          0x20: 01 12 01 00 01 31 82 94 50 0C 6D 01 00 00 00 00
          0x30: 60 00 00 00 00 07 17 00 FF FF FF FF FF FF FF FF

Router#
Router#sho runn
Building configuration...

Current configuration : 657 bytes
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
logging queue-limit 100
!
ip subnet-zero
!
!
!
mpls ldp logging neighbor-changes
!
!
!
!
!
!
!
!
!
no voice hpi capture buffer
no voice hpi capture destination
!
!
mta receive maximum-recipients 0
!
!
!
!
interface Ethernet0/0
 no ip address
 shutdown
 half-duplex
!
interface Serial0/0
 no ip address
 shutdown
!
interface Serial0/1
 no ip address
 shutdown
!
ip http server
ip classless
!
!
!
!
!
call rsvp-sync
!
!
mgcp profile default
!
dial-peer cor custom
!
!
!
!
line con 0
line aux 0
line vty 0 4
!
!
end

Router#

-- 
Thanks
Mathew

• Next message: Hafiz Ahmed: "Reg OFPF virtual link"
• Previous message: Scott Morris: "RE: Awesome Bootcamp"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:20 ART