From: din ram (dinesh4ie@gmail.com)
Date: Sun May 06 2007 - 08:18:47 ART
hi
you can do it with auto-rp as well.
since you are mentioning about r1 being the primary and r2 being backup.
In Auto rp the election process among'st competing RP's is based upon
highest ip address.
say in your case, you can try doing something this:
r1
int lo1
ip add 10.10.10.10 255.255.255.255
ip pim send-rp-announce lo1 scope 5 group-list 10
ip pim send-rp-discovery lo1 scope 5
ip pim rp-announce-filter rp-list rp group-list grp
access-list 10 permit host 224.1.1.1
ip access-list standard rp
permit host 10.10.10.10
ip access-list standard grp
permit host 224.1.1.1
r2
int lo1
ip add 2.2.2.2 255.255.255.255
ip pim send-rp-announce lo1 scope 5 group-list 10
access-list 10 permit host 224.1.1.1
HTH,
Dinesh
On 5/6/07, Hash Aminu <hashng@gmail.com> wrote:
>
> thanks alot guys you are right
> highest priority = lowest configured value just checked that out.
>
> regards
>
> hash
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:20 ART