From: Tandou Mohamed (dtandou@yahoo.com)
Date: Sat May 05 2007 - 19:45:29 ART
OOps
I got wrong DLCI defined. Working
Mohamed
Tandou Mohamed <dtandou@yahoo.com> wrote:
HUB Router
R3
interface Serial2/0
no ip address
encapsulation frame-relay
frame-relay interface-dlci 413 ppp Virtual-Template1
frame-relay interface-dlci 463 ppp Virtual-Template2
interface Virtual-Template1
ip address 156.1.15.3 255.255.255.0
no peer neighbor-route
!
interface Virtual-Template2
ip address 156.1.35.3 255.255.255.0
no peer neighbor-route
R3#sh ip int b
Interface IP-Address OK? Method Status Protocol
Ethernet0/0 156.1.3.3 YES manual up up
Ethernet1/0 173.1.23.3 YES manual administratively down down
Serial2/0 unassigned YES manual up up
Serial2/1 130.1.35.3 YES manual administratively down down
Serial2/2 173.1.13.3 YES manual administratively down down
Serial2/3 156.1.23.3 YES manual up up
Virtual-Access1 156.1.35.3 YES TFTP down down
Virtual-Template1 156.1.15.3 YES manual down down
Virtual-Access2 156.1.15.3 YES TFTP down down
Virtual-Template2 156.1.35.3 YES manual down down
Virtual-Access3 unassigned YES unset down down
Loopback0 150.1.3.3 YES manual up up
===========================================================================================
SPOKE ROURER
R1
interface Serial0/0
no ip address
encapsulation frame-relay
frame-relay interface-dlci 143 ppp Virtual-Template1
!
interface Virtual-Template1
ip address 156.1.15.1 255.255.255.0
no peer neighbor-route
R1# sh ip int b
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 156.1.18.1 YES manual up up
Serial0/0 unassigned YES manual up up
Serial0/1 173.1.13.1 YES manual administratively down down
Virtual-Access1 156.1.15.1 YES TFTP down down
Virtual-Template1 156.1.15.1 YES manual down down
Virtual-Access2 unassigned YES unset down down
Loopback0 150.1.1.1 YES NVRAM up up
============================================================================================
SPOKE ROUTER
R5
interface Serial0/0
no ip address
encapsulation frame-relay
no ip mroute-cache
tx-ring-limit 2
tx-queue-limit 2
frame-relay interface-dlci 643 ppp Virtual-Template1
!
interface Virtual-Template1
ip address 156.1.35.5 255.255.255.0
no peer neighbor-route
R5#sh ip int b
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 unassigned YES manual up up
Serial0/0 unassigned YES manual up up
FastEthernet0/1 156.1.58.5 YES manual up up
Serial0/1 156.1.45.5 YES manual up up
Virtual-Access1 156.1.35.5 YES TFTP down down
Virtual-Template1 156.1.35.5 YES manual down down
Virtual-Access2 unassigned YES unset down down
Loopback0 150.1.5.5 YES NVRAM up up
Hello GS,
i am running into an issue i stuck i can't see what's going on. need help
i configured virtual-template among HUB and SPOKE router. Can't ping each router.when i do show ip int brief my Virtual-Access are all down.
Config are posted below. Did i miss something or did something wrong in the config? Please advise
Thanks,
Mohamed
---------------------------------
Ahhh...imagining that irresistible "new car" smell?
Check outnew cars at Yahoo! Autos.
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:20 ART