From: Scott Morris (swm@emanon.com)
Date: Fri May 04 2007 - 19:57:09 ART
It would appear that the final configs and PG tend to be bass-ackwards from
the lab. While not affecting any functionalityt, it's still a very
important detail that needs to be corrected!
I would treat the lab as correct (as is a good thing to do in the "real" lab
as well!).
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPexpert VP - Curriculum Development
IPexpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Robert Cuello
Sent: Thursday, May 03, 2007 8:31 PM
To: smorris@ipexpert.com; 'Cisco certification'
Subject: RE: IPExpert R&S v9 Lab13.2
Scott,
In lab 13.2 The Lab workbook is asking to change:
R7's IP address to 150.50.5.1/24
R8's IP address to 150.50.5.2/24
However, your proctor guide gives R7 the .2 address and R8 the .1 address.
Who is right??
Thanks
Robert
---------------------------------
Ahhh...imagining that irresistible "new car" smell?
Check outnew cars at Yahoo! Autos.
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:20 ART