From: CCIE 19999 (ccie@iprimus.com.au)
Date: Sun Apr 29 2007 - 14:57:00 ART
Thanks Tony,
The orders of commands are important in this case. I have removed the
prefix-list from the distribute-list where it was applied and created the
prefix-list and applied back to the distribute-list.
Thanks for the tip. You are a Champion.
Regards,
Shine
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Tony
Schaffran
Sent: Monday, 30 April 2007 3:21 AM
To: 'CCIE 19999'; ccielab@groupstudy.com
Subject: RE: Router crashes when configring ipv6 access-list
If you have that prefix list applied anywhere when you try to modify it or
create it, it will cause a crash.
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of CCIE
19999
Sent: Sunday, April 29, 2007 10:01 AM
To: ccielab@groupstudy.com
Subject: Router crashes when configring ipv6 access-list
Hi,
My 3640 with 128/32MB crashes when the following access-list is entered. Am
I doing something wrong or missing anything here?
R1(config)#ipv6 prefix-list NONE seq 5 deny ::/0 le 128
%ALIGN-1-FATAL: Corrupted program counter 09:01:24 UTC Wed Mar 13 2002
pc=0x0 , ra=0x62453F4C , sp=0x65793CE0
%ALIGN-1-FATAL: Corrupted program counter 09:01:24 UTC Wed Mar 13 2002
pc=0x0 , ra=0x62453F4C , sp=0x65793CE0
Thanks,
Shine
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:38 ART