From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sun Apr 29 2007 - 03:42:08 ART
How about filtering on a switch between the two routers using a VACL
assuming there is a switch between them. Also what about denying traffic
inbound on R6's interfaces? Lastly you could try to policy route the
traffic that should be denied to null0.
--Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP) bdennis@internetworkexpert.com Internetwork Expert, Inc. http://www.InternetworkExpert.com Toll Free: 877-224-8987 Direct: 775-745-6404 (Outside the US and Canada)
On 4/28/07 10:32 PM, "Dishan Gamage" <dishanlg@gmail.com> wrote:
> Hi group > > If a question ask you to > > permit only telnet traffic from R2 's loopback0 to R6 using Acls but cannot > use access-class in R6 > > what should i do ?? > > tks in advance > > dishan > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:38 ART