From: Todd, Douglas M. (DTODD@PARTNERS.ORG)
Date: Fri Apr 27 2007 - 12:41:44 ART
Hi folks:
I have a problem with rip summarization where I am getting the error of :
*Jul 10 11:16:23.942: RIP-ERROR: summary route XXX/X not in routing table.
Here is my configuration:
!
interface FastEthernet0/0
bandwidth 10000
ip address 204.12.1.4 255.255.255.0
ip summary-address rip 150.1.0.0 255.255.240.0
ip summary-address rip 162.1.0.0 255.255.0.0
duplex auto
speed auto
end
Routing Protocol is "rip"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Sending updates every 30 seconds, next due in 13 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Redistributing: rip, ospf 1
Default version control: send version 2, receive version 2
Interface Send Recv Triggered RIP Key-chain
FastEthernet0/0 2 2
Automatic network summarization is not in effect
Address Summarization:
150.1.0.0/20 for FastEthernet0/0
162.1.0.0/16 for FastEthernet0/0
Maximum path: 4
Routing for Networks:
204.12.1.0
Routing Information Sources:
Gateway Distance Last Update
204.12.1.254 120 00:00:28
Distance: (default is 120)
The only way I can get it to work is if I stick a route to null0 for the
summary.
S 162.1.0.0/16 is directly connected, Null0
O 31.0.0.0/14 is a summary, 00:00:58, Null0
O 30.0.0.0/14 is a summary, 00:00:58, Null0
Ideas?
DMT
The information transmitted in this electronic communication is intended only for the person or entity to whom it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this information in error, please contact the Compliance HelpLine at 800-856-1983 and properly dispose of this information.
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:38 ART