From: Thomas Perrier (thomas@perrier.name)
Date: Fri Apr 27 2007 - 05:32:26 ART
On 27/04/07, Leo Leung <leoleung_yh@yahoo.com> wrote:
> When I did mutual redistribution in R5 between eigrp and ospf, put "redistribute connected metric 1500 1000 255 1 1500" in eigrp, which made 192.10.1.5/24 reachable in eigrp domain, but routers R1/R2 in ospf domain were not able to reach that until "redistribute connected subnets" was configured in ospf in R5, which is not needed in solution guide.
Sometimes it's best not to blindly trust the solutions guide. ;)
> What I am missing here? Since R5's e0/0 interface was not enabled in eigrp, I do not see that "redistribute eigrp 10 metric-type 1 subnets" in ospf would advertise prefix 192.10.1.5/24 to R1/R2 i ospf domain.
That's correct.
> I checked the archive, no notes about this issue, it seems I did not have it right and would like to hear what is wrong? My configuration is as follows.
Did you also check Internetwork Expert's own forum? Lots of answers
there (maybe not for this question, but generally speaking). That's
the first place I search when I have a question about one of their
practice labs.
-Thomas
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:38 ART