From: cisco efiko (ciscoefiko@googlemail.com)
Date: Tue Apr 24 2007 - 09:00:01 ART
Ivan,
Thanks for the link, but it's still the same with all the links sent.
arp = 0x806 0x0
pvst+ = 0xAAAA 0x0
pvst = 0x4343 0x0
stp = 0x4242 0x0
mst = ?
I.e, these links have the ARP value 0x806, but not the others, except too
much study is clouding my sight?!
On 4/24/07, Ivan Ivanov <ivanov.ivan@gmail.com> wrote:
>
> Hello,
>
>
> http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3900/c3930ug/codes.htm
>
> Maybe this will help
>
> HTH
>
> On 4/24/07, cisco efiko <ciscoefiko@googlemail.com> wrote:
> > Hi,
> >
> > I did ask this before sometime, the list on the CCO link you have
> provided
> > is not complete. Is there another way to find out these Ethertype
> values?
> >
> >
> > On 4/23/07, Jeff Mullan <jmullan78@gmail.com> wrote:
> > >
> > > Thanks buddy !!!
> > >
> > > On 4/23/07, Sean.Zimmerman@clubcorp.com <Sean.Zimmerman@clubcorp.com>
> > > wrote:
> > > >
> > > >
> > > > Ethertype codes (under IOS bridging command reference):
> > > >
> > > >
> > >
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hbr_r/br_aph.htm
> > > >
> > > >
> > > >
> > > >
> > > > *"Jeff Mullan" <jmullan78@gmail.com>*
> > > > Sent by: nobody@groupstudy.com
> > > >
> > > > 04/23/2007 04:31 PM Please respond to
> > > > "Jeff Mullan" <jmullan78@gmail.com>
> > > >
> > > > To
> > > > "Henk de Tombe" <henk.de.Tombe@qi.nl> cc
> > > > dampened <cheechew@hotmail.com>, "Cisco certification" <
> > > > ccielab@groupstudy.com> Subject
> > > > Re: L2 Ethertype mac acl
> > > >
> > > >
> > > >
> > > >
> > > > Is this some thing on the Doc CD we can refer to during the exam ?
> > > >
> > > > On 4/23/07, Henk de Tombe <henk.de.Tombe@qi.nl> wrote:
> > > > >
> > > > > Hi,
> > > > >
> > > > > LLC assignments:
> > > > > http://standards.ieee.org/regauth/llc/llcassignments.pdf
> > > > >
> > > > > Ethertype assignments:
> > > > > http://www.iana.org/assignments/ethernet-numbers
> > > > >
> > > > > regards,
> > > > > Henk
> > > > >
> > > > >
> > > > > -----Oorspronkelijk bericht-----
> > > > > Van: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Namens
> > > > > dampened
> > > > > Verzonden: maandag 23 april 2007 12:55
> > > > > Aan: Cisco certification
> > > > > Onderwerp: L2 Ethertype mac acl
> > > > >
> > > > > Could someone comment the accuracy of my compilation?
> > > > >
> > > > > arp = 0x806 0x0
> > > > > pvst+ = 0xAAAA 0x0
> > > > > pvst = 0x4343 0x0
> > > > > stp = 0x4242 0x0
> > > > > mst = ?
> > > > >
> > > > > Does anyone know what value should be used for MST?
> > > > > Where can I get all this information from DocCD? The one that on
> the
> > > > > Bridging Command appendix is not complete.
> > > > >
> > > > >
> > >
> _______________________________________________________________________
> > > > > Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > >
> > > > >
> > >
> _______________________________________________________________________
> > > > > Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
> > > >
> > > >
> _______________________________________________________________________
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
> --
> Best Regards!
>
> Ivan Ivanov
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:37 ART