From: udo (ccie_ka@arcor.de)
Date: Sun Apr 22 2007 - 12:41:44 ART
> > actually I'm trying to configure qos classification on a 3560
> >
>
> cut
> >
> > For my understand I should see DSCP value counters on 30 - 34 which
> > means dscp cs4 !?!?
> > But I saw only the counters on dscp 45-49 increasing !!
> >
> >
> Hi udo,
>
> Unfortunately, the counters for mls qos statistics on the 3560 appear to
> increment BEFORE policy-map application. Very difficult to verify
> policy-based marking directly on the 3560. To verify you configs, try
> looking for hits on a downstream router using ACL, IP Accounting,
> Netflow, or Policy-map. The hits against 48 are probably some IPP 6
> control traffic.
>
Hi Bob,
thx for you comments..this are really helpful..
So please have a look when I debug on the incoming switch...I don't know
was this messages mean...
============================================================================
00:54:08: IP: s=155.1.202.4 (Vlan202), d=155.1.202.1, len 100, input
feature
00:54:08: ICMP type=8, code=0, QoS Classification(1), rtype 0, forus
FALSE, sendself FALSE, mtu 0
=============== ========================================================
Udo
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:36 ART