From: WorkerBee (ciscobee@gmail.com)
Date: Fri Apr 20 2007 - 22:23:46 ART
Hi Group,
This is something that confused me.
If "BPDU filtering" + "Port Fast" is enabled globally, why does a switchport
loses it's Port Fast status as well as BPDU filtering when a BPDU
packet is received from that particular port?
If I want BPDU filtering protection and Port Fast status of a switch
port, why upon
receiving a BPDU from a PortFast port turned off both features?
So how can I ensure I still have PortFast enable and BPDU filtering
just block the BPDU packets from the PortFast port and yet has both
features enable without losing their status?
Reference link,
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12235se/cr/cli3.htm#wp1946892
You should globally enable BPDU filtering on a switch so that hosts
connected to switch interfaces do not receive BPDUs. If a BPDU is
received on a Port Fast-enabled interface, the interface loses its
Port Fast-operational status and BPDU filtering is disabled.
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:36 ART