From: Mustafa Bayramov (mbayramo@cisco.com)
Date: Wed Apr 18 2007 - 01:55:30 ART
Hello Victor,
First of all thank you for emulating scenario that I mention it exactly that
I had before.
What IOS version on the routers ?
I9ve used the same scenario FA between CA and PE1 so metric 2560005376 on
the PE2 but where unable to redistribute it to EIGRP on PE2.
IOS 12.4 latest not training.
BTW could try to put summary default on PE2 toward CA-1 on F0/0.1
Many thanks.
Mustafa Bayramov
Systems Engineer,
CCIE,CISSP
On 4/17/07 9:03 PM, "Victor Cappuccio" <victor@ccbootcamp.com> wrote:
> Hi Mustafa
>
> I hope this helps a little bit..
>
> The Topology
> CA-1 -- PE1 -- P -- PE2 -- CA-2
>
> and the Scriting
>
> CA-1(config-router)#red stat metric 1 1 1 1 1
> CA-1(config-router)#^Z
> CA-1#
> CA-1#wr
> Building configuration...
>
> rack11>4
> [Resuming connection 4 to R4 ... ]
>
> PE1(config-router-af)#
> PE1(config-router-af)#do show ip route vrf CA
>
> Routing Table: CA
> Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
> D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
> E1 - OSPF external type 1, E2 - OSPF external type 2
> i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS
level-2
> ia - IS-IS inter area, * - candidate default, U - per-user static
route
> o - ODR, P - periodic downloaded static route
>
> Gateway of last resort is 192.168.1.1 to network 0.0.0.0
>
> 10.0.0.0/32 is subnetted, 1 subnets
> D 10.2.2.2 [90/156160] via 192.168.1.1, 00:07:06, FastEthernet0/0.1
> C 192.168.1.0/24 is directly connected, FastEthernet0/0.1
> D*EX 0.0.0.0/0 [170/2560002816] via 192.168.1.1, 00:00:05,
FastEthernet0/0.1
> PE1(config-router-af)#
> rack11>6
> [Resuming connection 6 to R6 ... ]
>
> PE2#show ip bgp vpnv4 all
> BGP table version is 5, local router ID is 172.16.6.6
> Status codes: s suppressed, d damped, h history, * valid, > best, i -
> internal,
> r RIB-failure, S Stale
> Origin codes: i - IGP, e - EGP, ? - incomplete
>
> Network Next Hop Metric LocPrf Weight Path
> Route Distinguisher: 65001:111 (default for vrf CA)
> *>i10.2.2.2/32 172.16.4.4 156160 100 0 ?
> *>i192.168.1.0 172.16.4.4 0 100 0 ?
> PE2#
> rack11>4
> [Resuming connection 4 to R4 ... ]
>
> PE1(config-router-af)#
> PE1(config-router-af)#default-information originate
> PE1(config-router-af)#
> rack11>6
> [Resuming connection 6 to R6 ... ]
>
> PE2#show ip bgp vpnv4 all
> BGP table version is 6, local router ID is 172.16.6.6
> Status codes: s suppressed, d damped, h history, * valid, > best, i -
> internal,
> r RIB-failure, S Stale
> Origin codes: i - IGP, e - EGP, ? - incomplete
>
> Network Next Hop Metric LocPrf Weight Path
> Route Distinguisher: 65001:111 (default for vrf CA)
> *>i0.0.0.0 172.16.4.4 2560002816 100 0 ?
> *>i10.2.2.2/32 172.16.4.4 156160 100 0 ?
> *>i192.168.1.0 172.16.4.4 0 100 0 ?
> PE2#
> rack11>
> [Resuming connection 6 to R6 ... ]
>
> PE2#
> PE2#conf te
> Enter configuration commands, one per line. End with CNTL/Z.
> PE2(config-router-af)#do show run | b router eigrp
> router eigrp 8080
> auto-summary
> !
> address-family ipv4 vrf CA
> redistribute bgp 8080 metric 1 1 1 1 1
> network 192.168.2.0
> no auto-summary
> autonomous-system 111
> exit-address-family
> !
> router ospf 1
> router-id 172.16.6.6
> log-adjacency-changes
> network 172.16.6.6 0.0.0.0 area 0
> network 172.16.56.6 0.0.0.0 area 0
> !
> router bgp 8080
> no synchronization
> bgp log-neighbor-changes
> neighbor 172.16.4.4 remote-as 8080
> neighbor 172.16.4.4 update-source Loopback0
> neighbor 172.16.4.4 next-hop-self
> no auto-summary
> !
> address-family vpnv4
> neighbor 172.16.4.4 activate
> neighbor 172.16.4.4 send-community both
> neighbor 172.16.4.4 next-hop-self
> exit-address-family
> !
> address-family ipv4 vrf CB
> no synchronization
> exit-address-family
> !
> address-family ipv4 vrf CA
> no synchronization
> exit-address-family
> !
> !
> PE2(config-router-af)#router eigrp 8080
> PE2(config-router)# !
> PE2(config-router)# address-family ipv4 vrf CA
> PE2(config-router-af)#red bgp 8080 metric 1 1 1 1 1
> PE2(config-router-af)#
>
> rack11>9
> [Resuming connection 9 to BB1 ... ]
> CB-3(config)#^Z
> CB-3#
> CB-3#wr
> Building configuration...
>
> CB-3#
> CB-3#show ip route
> Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
> D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
> E1 - OSPF external type 1, E2 - OSPF external type 2
> i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS
level-2
> ia - IS-IS inter area, * - candidate default, U - per-user static
route
> o - ODR, P - periodic downloaded static route
>
> Gateway of last resort is 192.168.2.254 to network 0.0.0.0
>
> 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
> D 10.2.2.2/32 [90/158720] via 192.168.2.254, 00:00:16,
FastEthernet0/0
> C 10.9.9.0/24 is directly connected, Loopback0
> D 192.168.1.0/24 [90/30720] via 192.168.2.254, 00:00:16, FastEthernet0/0
> C 192.168.2.0/24 is directly connected, FastEthernet0/0
> D*EX 0.0.0.0/0 [170/2560005376] via 192.168.2.254, 00:00:16,
FastEthernet0/0
> CB-3#
> rack11>4
> [Resuming connection 4 to R4 ... ]
>
>
> PE1#show ip bgp vpnv4 all labels
> Network Next Hop In label/Out label
> Route Distinguisher: 65001:111 (CA)
> 0.0.0.0 192.168.1.1 21/nolabel
> 10.2.2.2/32 192.168.1.1 18/nolabel
> 192.168.1.0 0.0.0.0 20/aggregate(CA)
>
> PE1#
>
>
>
> thanks,
> Victor Cappuccio.-
> Network Learning Inc - A Cisco Sponsored Organization (SO) YES! We take
> Cisco Learning credits!
> victor@ccbootcamp.com
> http://www.ccbootcamp.com (Cisco Training and Rental Racks)
> http://www.ccbootcamp.com/groupstudy.html (groupstudy member discounts!)
> Voice: 702-968-5100
> FAX: 702-446-8012
>
>
>
>> > -----Original Message-----
>> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>> > Mustafa Bayramov
>> > Sent: Tuesday, April 17, 2007 11:24 AM
>> > To: ccielab@groupstudy.com
>> > Subject: CE-PE EIGRP default route not redistributed to VRF.
>> >
>> > Folks,
>> >
>> > Anyone faced with following issue with MPLS ?
>> >
>> > EIGRP between CE1-PE1 and EIGRP between CE2-PE2.
>> >
>> > CE1 advertise default route and PE1 redistribute all learned route to X
VRF
>> > to BGP , PE2 receive all prefix for X VRF and redistribute to EIGRP
>> process.
>> >
>> > PE2 see default route in BGP table and routing table for VRF X.
>> >
>> > But I don't see default route in EIGRP topology and don't see it in
debug
>> > output of eigrp.
>> >
>> > I was able to fix this issue by using different EIGRP AS number between
>> > CE-PE1 and CE-PE2 in other word before that all AS number was same in
MBGP
>> > and EIGRP on both side and customer side.
>> >
>> > Many thanks.
>> >
>> > Mustafa Bayramov
>> > Systems Engineer,
>> > CCIE,CISSP
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:36 ART