From: Scott Morris (smorris@ipexpert.com)
Date: Mon Apr 16 2007 - 22:57:48 ART
The commands have existed for a while, but always are listed in the release
notes as "impending feature" (which I'm pretty sure isn't going to happen at
this point!)...
So they're a little dysfunctional. However, on the 3550, you can use the
private-vlan edge capability with 'switchport protected' instead.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPexpert VP - Curriculum Development
IPexpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Tony
Schaffran
Sent: Monday, April 16, 2007 9:50 PM
To: 'premkumar somasundaram'; ccielab@groupstudy.com
Subject: RE: Private vlan
I thought private vlan's were not available on the 3550's.
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
premkumar somasundaram
Sent: Monday, April 16, 2007 6:24 AM
To: ccielab@groupstudy.com
Subject: Private vlan
Group,
I am trying to practice private vlan on 3550 switch. The IOS version
c3550-ipbasek9-mz.122-25.SEC2.bin. . I am able to create the private vlan,
such as
vlan 100
private-vlan primary
vlan 101
private-vlan isolated
vlan 102
private-vlan community
vlan 100
private-vlan associated add 101.102
When I am in the interface mode to assign the port to the private vlan, I
dont see the option switchport mode private-vlan host.
It is a 3550 smi switch and am running emi image on it.
Am i missing something here??
Thanks
prem
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:36 ART