From: csc david (davidcsc2002@yahoo.com.cn)
Date: Mon Apr 16 2007 - 21:38:02 ART
Hi, because my 6509 is CatOS, and not using MSFC, so I cannot "ip route-cache flow" command on the VLAN , my wanted is get the L2 ports traffic and detail packets info and the vlan traffic info. and the info should include the messages about souce eth port.
Thanks.
"Richard L. Pickard" <richardlpickard@hotmail.com> P45@#:
7"<~HK: "Richard L. Pickard" <richardlpickard@hotmail.com>
JU<~HK: "csc david" <davidcsc2002@yahoo.com.cn>
VwLb: Re: how to use netflow or accounting on 6509 catos?
HUFZ: Mon, 16 Apr 2007 06:44:11 -0500
I have been working on this for a while. What are you using as your NetFlow
Collector ?
I have one I highly recomend
Are you putting the "ip route-cache flow" command on the VLAN ?
Thanks,
Richard
CCIE | NNCSE | MCSE
//
----- Original Message -----
From: "csc david"
To: ;
Sent: Sunday, April 15, 2007 10:59 PM
Subject: how to use netflow or accounting on 6509 catos?
> Hi,all
>
> How can I get netflow or accounting on 6509 catos? The 6509 is used just
> as L2 switching, not use L3. So if I want to catch the detail packets or
> flows ordered by fast-ethernet ports, how can I solve it? My wanted is
> something like this:
> source_switchport destination_switchport source_ip dest_ip bytes
> packets
>
> The sniffer tool can catch the whole packets, but cannot get the info
> about from or to which ethernet port; and netflow can be configed on
> routers, I don't know if it can work on L2 switch.
> So pls help, thanks.
>
>
> ---------------------------------
> G@W"QE;"Cb7QSJOd-3.5GH]A?#,20M8=<~#!
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
---------------------------------
G@W"QE;"Cb7QSJOd-3.5GH]A?#,20M8=<~#!
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:36 ART