RIP Passive interafce on 3550

From: CCIE 19999 (ccie@iprimus.com.au)
Date: Sun Apr 15 2007 - 07:22:21 ART

• Next message: huangyinxiao@gmail.com: "Multicast problem"
• Previous message: sirus MOGHADASIAN: "important but fundamental question from experienced guys"
• Next in thread: Darby Weaver: "Re: RIP Passive interafce on 3550"
• Maybe reply: Darby Weaver: "Re: RIP Passive interafce on 3550"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Group,

I am not sure if my understanding on Passive-interface on a 3550 switch is
correct for RIP.

The task is asking me to configure RIP on a 3550 and not send RIP updates on
any other interfaces. The switch segment referring is having VLAN7, VLAN 77,
Fa0/3 and L0. The switch is configured with many other VLANs and routed
ports. In this case, do you actually need to enable the passive-interface
default and disable the passive-interfaces on VLAN7, VLAN77 and Fa0/3. The
solution in the workbook does not use passive-interface at all for this
switch.

Hope I have explained enough for this scenario. If anything is not clear,
please let me know.

Thanks in advance,

Shine

• Next message: huangyinxiao@gmail.com: "Multicast problem"
• Previous message: sirus MOGHADASIAN: "important but fundamental question from experienced guys"
• Next in thread: Darby Weaver: "Re: RIP Passive interafce on 3550"
• Maybe reply: Darby Weaver: "Re: RIP Passive interafce on 3550"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:35 ART