From: Hewie (whewetson@gmail.com)
Date: Sun Apr 08 2007 - 01:40:10 ART
I follow the example in COD, use the broadcast statement on the Link-Local
map, works the other way around, figure it is best to do it the "Cisco way"
interface Serial3
encapsulation frame-relay
ipv6 address 2001:0DB8:2222:1044::46/64
frame-relay map ipv6 FE80::E0:F727:E400:A 17 broadcast
frame-relay map ipv6 FE80::60:3E47:AC8:8 19 broadcast
frame-relay map ipv6 2001:0DB8:2222:1044::72 19
frame-relay map ipv6 2001:0DB8:2222:1044::73 17
On 4/7/07, Rahmlow, Howard F. <Howard.F.Rahmlow@unisys.com> wrote:
>
> Ok - then were do you put the broadcast statement, or does it just have
> to be one of the frame maps for IPV6?
>
> Thanks
> Howard
>
> -----Original Message-----
> From: Eric Poulin [mailto:epoulins@yahoo.com]
> Sent: Saturday, April 07, 2007 4:07 PM
> To: Rahmlow, Howard F.; ccielab@groupstudy.com
> Subject: Re: IPV6 Frame Relay - Broadcast statement
>
> IPv6 does not use broadcasts at all, relying only on the use of
> multicast addresses (e.g.
> FF02::1 is basically the same as 255.255.255.255 for IPv4). The
> "broadcast" FR mapping
> keyword is required only for multicast support.
>
> --- "Rahmlow, Howard F." <Howard.F.Rahmlow@unisys.com> wrote:
>
> > Any good rules of thumb for when to use the broadcast statement on
> frame
> > relay maps, with IPV6. Just about every example I see is different.
> >
> >
> >
> > Thanks
> >
> > Howard
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
>
>
> ________________________________________________________________________
> ____________
> Need Mail bonding?
> Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users.
> http://answers.yahoo.com/dir/?link=list&sid=396546091
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:35 ART