From: Laidlaw, Patrick A. (Patrick.Laidlaw@wwt.com)
Date: Tue Apr 03 2007 - 13:56:08 ART
Venkat,
I think you have it wrong. The Blade WS X6724-SFP Support 1P-3Q-8T
That is one priority Queue 3 regular queues and 8 tail drops. An
example config for this device is as follows:
wrr-queue bandwidth 5 25 70
wrr-queue queue-limit 5 25 40
wrr-queue random-detect min-threshold 1 70 100 100 100 100 100 100 100
wrr-queue random-detect min-threshold 3 50 60 70 80 90 100 100 100
wrr-queue random-detect max-threshold 1 80 100 100 100 100 100 100 100
wrr-queue random-detect max-threshold 2 80 100 100 100 100 100 100 100
wrr-queue random-detect max-threshold 3 60 70 80 90 100 100 100 100
wrr-queue cos-map 1 1 1
wrr-queue cos-map 2 1 0
wrr-queue cos-map 3 1 4
wrr-queue cos-map 3 2 2
wrr-queue cos-map 3 3 3
wrr-queue cos-map 3 4 6
wrr-queue cos-map 3 5 7
priority-queue cos-map 1 5
mls qos trust dscp
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Venkataramanaiah.R
Sent: Tuesday, April 03, 2007 4:49 AM
To: ccielab@groupstudy.com
Subject: Re: Stupid QoS Question!
In fact the show output says the same.. So I am puzzled if my
understanding of WRR is wrong.!
Queueing Mode In Rx direction: mode-cos
Receive queues [type = 1q8t]:
Queue Id Scheduling Num of thresholds
-----------------------------------------
01 WRR 08
On 4/3/07, Venkataramanaiah. R <vramanaiah@gmail.com> wrote:
>
> Guys,
>
> The 6500 Config guide says the input scheduler is WRR for this
linecard...
> When there is only 1Q available for this linecard, wouldnt that be
> FIFO? How can they claim to do WRR?
>
> Have they generalized the documentation and hence this error?
>
> WS-X6724-SFP with CFC 1Q8T WRR
>
> Regards
> -Venkat
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:34 ART