From: Ronnie Angello (ronnie.angello@gmail.com)
Date: Mon Apr 02 2007 - 22:45:07 ART
It's not recommended because it only works for sparse mode groups. It
relies on the sparse mode join message. Since it does not support dense
mode flooding, you may have problems with Auto-RP if the MA is not placed in
the appropriate location.
Ronnie
On 4/2/07, Gabriel Nunes <gabriel.nunes@gmail.com> wrote:
>
> ???
>
> On 4/2/07, Rahmlow, Howard F. <Howard.F.Rahmlow@unisys.com> wrote:
> >
> > Real world - not a good idea
> > Lab - Do what they tell you to
> > You're getting the "warning" for a reason
> >
> > Howard
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > Gabriel Nunes
> > Sent: Monday, April 02, 2007 6:16 PM
> > To: ccielab
> > Subject: nbma mode with sparse-dense mode
> >
> > Hi Gs,
> >
> > Please I`d like to know why we get the following message when applying
> > ip
> > pim nbm-mode under a sparse-dense mode interface... Is this a problem?
> >
> > r1(config-if)#ip pim nbma-mode
> > PIM nbma-mode is not recommended for sparse-dense-mode
> >
> >
> > At this case the R1 is a hub and nbma-mode is apropriated...
> >
> > Thanks for your help on this
> >
> > Gabriel
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:34 ART