From: Ivan (ivan@iip.net)
Date: Fri Mar 30 2007 - 08:09:46 ART
Set distance 130 to route directed to other tunnel side. Configure this on
both ends of tunnel.
On Friday 30 March 2007 11:40, Devinda Patel wrote:
> But the lab says I can not use statics and my tunnel is learning about the
> route from RIP and wants to do EIGRP through the tunnel but the tunnel
> keeps flapping because the EIGRP route is taking precendance in the routing
> table.
>
> On 3/30/07, maureen schaar <maureen.schaar@gmail.com> wrote:
> > A good reference is found here:
> >
> > http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094
> >690.shtml
> >
> > Maureen
> >
> > On 3/30/07, Kulcsar Andras Benjamin <Kulcsar.Andras@kfki-lnx.hu> wrote:
> > > Use different routing protocols on the tunnel and the physical
> >
> > interfaces
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> >
> > defindapatel@gmail.com
> >
> > > Sent: Friday, March 30, 2007 8:13 AM
> > > To: ccielab@groupstudy.com
> > > Subject: Recursive routing
> > >
> > > I have a tunnel with keeps going up and down because of recursive
> >
> > routing. What is the best way to get around this?
> >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
-- Ivan
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:53 ART