From: Devinda Patel (defindapatel@gmail.com)
Date: Fri Mar 30 2007 - 04:40:54 ART
But the lab says I can not use statics and my tunnel is learning about the
route from RIP and wants to do EIGRP through the tunnel but the tunnel keeps
flapping because the EIGRP route is taking precendance in the routing table.
On 3/30/07, maureen schaar <maureen.schaar@gmail.com> wrote:
>
> A good reference is found here:
>
> http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094690.shtml
>
> Maureen
>
> On 3/30/07, Kulcsar Andras Benjamin <Kulcsar.Andras@kfki-lnx.hu> wrote:
> > Use different routing protocols on the tunnel and the physical
> interfaces
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> defindapatel@gmail.com
> > Sent: Friday, March 30, 2007 8:13 AM
> > To: ccielab@groupstudy.com
> > Subject: Recursive routing
> >
> > I have a tunnel with keeps going up and down because of recursive
> routing. What is the best way to get around this?
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:53 ART