Re: Multicast Troubleshooting (can't understand)

From: Bob Sinclair (bob@bobsinclair.net)
Date: Tue Mar 27 2007 - 23:20:02 ART

Next message: johngibson1541@yahoo.com: "3560 has no shaping tools. Why not ? Because 3560 is not meant"
Previous message: Darby Weaver: "Re: 1st Lab Attempt - Once Beaten, Twice Bold!!"
Maybe in reply to: iyux2000@gmail.com: "Multicast Troubleshooting (can't understand)"
Next in thread: Bob Sinclair: "Re: Multicast Troubleshooting (can't understand)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

iyux2000@gmail.com wrote:
> Hi group,
>
> I encountered a multicast problem in my network, i can't ping the multicast address only from one of my routers after i configured the AUTORP with sparse-dense-mode. At the same, i found that i can't ping if i configured sparse-dense-mode on serial and fastethernet interface, ( the debug output indicates "mroute olist null". After that, I enabled sparse-dense-mode on my loopback and ping again, it was successful this time.
>
>
If you are saying that you must put PIM on the loopback in order to make
a join-group effective, that is normal.

Bob Sinclair CCIE 10427 CCSI 30427 www.netmasterclass.net

Next message: johngibson1541@yahoo.com: "3560 has no shaping tools. Why not ? Because 3560 is not meant"
Previous message: Darby Weaver: "Re: 1st Lab Attempt - Once Beaten, Twice Bold!!"
Maybe in reply to: iyux2000@gmail.com: "Multicast Troubleshooting (can't understand)"
Next in thread: Bob Sinclair: "Re: Multicast Troubleshooting (can't understand)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:53 ART