From: Digital Yemeni (digital.yemeni@gmail.com)
Date: Sun Mar 25 2007 - 10:15:06 ART
Really nice summary! :) Thanks a lot Bob!!
On 3/25/07, Bob Sinclair <bob@bobsinclair.net> wrote:
>
> Digital Yemeni wrote:
> > Hi group,
> >
> > I know that we can set the CoS mapping via the "wrr-queue cos-map"
> interface
> > command on the 3550. Since this command is not available on the 3560,
> how
> > can we do it on a 3560 interface?
> >
> > The "mls qos srr-queue input cos-map" is only a global command as far as
> i
> > know! is there any way to set it as per interface on the 3560?
> >
> > Thanks in advance!
> >
> >
> Just to confirm, there is no way to do per-interface cos-maps on the
> 3560. For reference, here are some other QoS differences between the
> 3550 and the 3560:
>
> The 3550 permits per-interface specification of buffer depths, whereas
> the 3560 allows you to create two queue-sets globally then apply one of
> the queue-sets per-interface. The queue-set allows you to configure
> buffers, not cos-to-queue mappings.
>
> The 3550 permits input and output service policies. The 3560 permits
> only input service policies.
>
> The 3550 priority queue out is queue 4, the 3560 priority queue outbound
> is queue 1.
>
> The 3550 does not support traffic shaping, the 3560 does.
>
> The 3550 permits a direct vlan match in a class-map, the 3560 uses
> hierarchical policies applied to an SVI for vlan matches.
>
> The 3550 does not provide configurable drop thresholds on FE ports, the
> 3560 does.
>
> The 3550 maps traffic to queues based on CoS value, the 3560 can also
> map traffic to queues based on internal DSCP value.
>
> The 3550 does not support output bandwidth limits per port, the 3560
> does. (However the 3550 has output policing matching on DSCP)
>
> Tim Szigeti's book "End-to-End QoS Network Design" has a table comparing
> QoS features on the Catalysts at page 264.
>
>
> --
>
>
> Bob Sinclair CCIE 10427 CCSI 30427
> www.netmasterclass.net
>
-- Best Regards! Digital, CCIE# to be assigned by Cisco when it collects enough $$ out of me! :p
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:52 ART