From: M S (michaelgstout@hotmail.com)
Date: Sat Mar 24 2007 - 21:25:21 ART
What if you have two root switches in seperate spanningtree domains?> Subject:
Ask for help : Best chance to set the switch to be root> Date: Sun, 25 Mar
2007 02:07:26 +0700> From: Marut.s@datacraft-asia.com> To:
ccielab@groupstudy.com> > Hi group,> > I have a question about best chance for
set up the switch to be> the root switch. Spanning-tree vlan xx priority 0
command that should be> used.> > But if other switch has been setup priority =
0 too. Tie break> is mac-address. > Question is how could I setup mac-address
for bridge-id ?> > > Regards,> Maruto > > >
****************************************************************************>
This email and all contents are subject to the following disclaimer:> >
http://www.datacraft-asia.com/disclaimer>
****************************************************************************>
> _______________________________________________________________________>
Subscription information may be found at: >
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:52 ART