From: Abderrahim sadki (a_sadki1@hotmail.com)
Date: Sat Mar 24 2007 - 06:55:40 ART
Well it depends on your config under the line con 0. If it says " no
login" then you shouldnt have any problem. Abderrahim
--------------------------------------------------------------------
From: "Digital Yemeni" <digital.yemeni@gmail.com>
Reply-To: "Digital Yemeni" <digital.yemeni@gmail.com>
To: ccielab@groupstudy.com
Subject: dot1x & AAA
Date: Sat, 24 Mar 2007 17:07:26 +0800
>Some people mentioned that the "aaa authentication login default
none" must
>be put along with the dot1x authentication. However, my config looks
like
>this:
>
>aaa new-model
>aaa authentication dot1x default group radius
>dot1x system-auth-control
>
>I was able to log off of the console and logged in back without any
problem!
>
>
>Was this a problem in older IOS (locking all vty lines and console)
and they
>corrected it in newer versions? Any comments on this?!
>
>
>--
>Best Regards!
>Digital, CCIE# to be assigned by Cisco when it collects enough $$
out of me!
>:p
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
------------------------------------------------------------------------
Don't just search. Find. MSN Search Check out the new MSN Search!
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:52 ART