From: Tony Schaffran (groupstudy@cconlinelabs.com)
Date: Fri Mar 23 2007 - 11:07:47 ART
Am I missing something here?
Would a GRE tunnel from loopback to loopback give you the desired results?
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Antonio Soares
Sent: Friday, March 23, 2007 6:29 AM
To: ccielab@groupstudy.com
Subject: RE: Challenge
Hello GS,
I forgot to add one resctiction: you cannot add ip addressing.
Any takers ? I found this very interesting and challenging.
Thanks.
Antonio
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Antonio Soares
Sent: sexta-feira, 23 de Margo de 2007 1:21
To: ccielab@groupstudy.com
Subject: Challenge
Dear GS,
I have an interesting challenge for you. Given the setup and configurations
bellow, you are allowed to configure a tunnel between R1 and R3. You need to
reach 10.10.1.1 from R3 in just one hop.
++++++++++++++++++++++++++++++++++++++++++++++++
Original Output:
++++++++++++++++++++++++++++++++++++++++++++++++
R3#trace 10.10.1.1
Type escape sequence to abort.
Tracing the route to 10.10.1.1
1 10.10.23.2 16 msec 16 msec 16 msec
2 10.10.12.1 32 msec * 28 msec
R3#
++++++++++++++++++++++++++++++++++++++++++++++++
Required Output:
++++++++++++++++++++++++++++++++++++++++++++++++
R3#trace 10.10.1.1
Type escape sequence to abort.
Tracing the route to 10.10.1.1
1 xxx.xxx.xxx.xxx 44 msec * 44 msec
R3#
++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++
Setup and Configurations:
++++++++++++++++++++++++++++++++++++++++++++++++
(Area 0)===R1===(Area 12)===R2===(Area 0)===R3===(Area 0)
++++++++++++++++++++++++++++++++++++++++++++++++
R1:
!
interface Loopback0
ip address 10.10.1.1 255.255.255.0
!
interface Serial0/0
no ip address
encapsulation frame-relay
!
interface Serial0/0.12 point-to-point
ip address 10.10.12.1 255.255.255.0
frame-relay interface-dlci 102
!
router ospf 1
router-id 10.10.1.1
log-adjacency-changes
area 12 virtual-link 10.10.2.2
network 10.10.1.1 0.0.0.0 area 0
network 10.10.12.1 0.0.0.0 area 12
!
++++++++++++++++++++++++++++++++++++++++++++++++
R2:
!
interface Loopback0
ip address 10.10.2.2 255.255.255.0
!
interface Serial0/0
no ip address
encapsulation frame-relay
!
interface Serial0/0.12 point-to-point
ip address 10.10.12.2 255.255.255.0
frame-relay interface-dlci 201
!
interface Serial0/0.23 point-to-point
ip address 10.10.23.2 255.255.255.0
frame-relay interface-dlci 203
!
router ospf 1
router-id 10.10.2.2
log-adjacency-changes
area 12 virtual-link 10.10.1.1
network 10.10.12.2 0.0.0.0 area 12
network 10.10.23.2 0.0.0.0 area 0
!
++++++++++++++++++++++++++++++++++++++++++++++++
R3:
!
interface Loopback0
ip address 10.10.3.3 255.255.255.0
!
interface Serial1/0
no ip address
encapsulation frame-relay
!
interface Serial1/0.23 point-to-point
ip address 10.10.23.3 255.255.255.0
frame-relay interface-dlci 302
!
router ospf 1
router-id 10.10.3.3
log-adjacency-changes
network 10.10.3.3 0.0.0.0 area 0
network 10.10.23.3 0.0.0.0 area 0
!
++++++++++++++++++++++++++++++++++++++++++++++++
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:52 ART