From: cisco efiko (ciscoefiko@googlemail.com)
Date: Wed Mar 21 2007 - 02:24:28 ART
Jim and all that responded, I'd like to say thanks.
I need to be more specific, I need the LSAP values. So where can I find
those on CCO?
Thanks
Efiko
On 3/19/07, Jim <firstnamejim@gmail.com> wrote:
>
> I found it this path too:
>
> IOS12.4 -->
> Command Reference -->
> IOS Bridging command reference -->
> Appendix
>
>
> On 3/19/07, Kulcsar Andras Benjamin <Kulcsar.Andras@kfki-lnx.hu> wrote:
> >
> > Hello Efiko,
> >
> > Try this:
> >
> >
> >
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hbr_r/b
> r_aph.htm
> >
> > Regards,
> > Andras
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > cisco efiko
> > Sent: Monday, March 19, 2007 9:49 AM
> > To: Cisco certification
> > Subject: Ethernet Ethertype values on CCO
> >
> > Hi,
> >
> > Does anyone know where this sits on CCO? Or better still how to
> determine
> > the HEX value for these on a catalyst swtich.
> >
> > Regards,
> >
> > Efiko
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:52 ART