From: Victor Solaz (vsolaz@gmail.com)
Date: Tue Mar 20 2007 - 07:48:38 ART
---------- Forwarded message ----------
From: Victor Solaz <vsolaz@gmail.com>
Date: Mar 20, 2007 11:48 AM
Subject: Re: PPP MULTILINK OVER FRAME RELAY
To: Tandou Mohamed <dtandou@yahoo.com>
Hi,
Try using 2 different Virtual Templates, one for each DLCI.
Cheers.
On 3/18/07, Tandou Mohamed < dtandou@yahoo.com> wrote:
>
> Ken,
> as soon as i added the two commands below on each Virtual-Template1 it
> came up/up.
> Thanks man
>
> Mohamed
>
> R3
> interface Virtual-Template1
> ppp chap hostname R3
> ppp chap password 0 CISCO
>
> R2
> interface Virtual-Template1
> ppp chap hostname R2
> ppp chap password 0 CISCO
>
> ======================================================
>
> Rack1R3#sh ip int b
> Interface IP-Address OK? Method
> Status Protocol
> Ethernet0/0 156.1.3.3 YES manual
> up up
> Ethernet1/0 204.12.1.3 YES NVRAM administratively
> down down
> Serial2/0 unassigned YES manual
> up up
> Serial2/1 unassigned YES manual
> up up
> Serial2/2 163.1.13.3 YES NVRAM administratively
> down down
> Serial2/3 156.1.23.3 YES manual
> up up
> Multilink1 174.1.23.3 YES manual
> up up
> Virtual-Access1 unassigned YES
> unset up up
> Virtual-Template1 unassigned YES
> unset down down
> Virtual-Access2 unassigned YES
> unset up up
> Virtual-Access3 unassigned YES
> unset down down
> Loopback0 150.1.3.3 YES
> NVRAM up up
> Rack1R3#
> Rack1R3#ping 174.1.23.3
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 174.1.23.3, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 88/91/100 ms
> Rack1R3#
> Rack1R3#ping 174.1.23.2
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 174.1.23.2, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 44/46/48 ms
>
> "Norton, Ken" <knorton@presidio.com> wrote:
> Mohamed,
>
> Try taking off chap authentication to see if the interface comes up.
> If the interface comes up then put chap back on and review your ppp
> authentication. Based on the router names you may need to change your
> usernames to reflect the hostnames for chap to work.
>
> Thanks,
> Ken
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Tandou Mohamed
> Sent: Sunday, March 18, 2007 3:34 PM
> To: ccielab@groupstudy.com
> Subject: PPP MULTILINK OVER FRAME RELAY
>
> Hello GS,
> i configured ppp multilink over frame relay my multilink interface is
> down.i don't see anything wrong with the config. Can someone check my
> config below and tell me what i am doing wrong?
>
> Thanks
>
> Mohamed
>
> Rack1R2#
> username R3 password 0 CISCO
> interface Multilink1
> ip address 174.1.23.2 255.255.255.0
> ppp multilink
> ppp multilink group 1
> !
> !
> interface Serial0/0
> no ip address
> encapsulation frame-relay
> no dce-terminal-timing-enable
> no frame-relay inverse-arp
> !
> interface Serial0/0.203 point-to-point
> frame-relay interface-dlci 231 ppp Virtual-Template1
> !
> interface Serial0/0.213 point-to-point
> frame-relay interface-dlci 241 ppp Virtual-Template1
> !
> interface Virtual-Template1
> no ip address
> ppp authentication chap
> ppp multilink
> ppp multilink group 1
> ===========================
>
> Rack1R3#
> username R2 password 0 CISCO
>
> interface Multilink1
> ip address 174.1.23.2 255.255.255.0
> ppp multilink
> ppp multilink group 1
> !
>
> interface Serial0/0
> no ip address
> encapsulation frame-relay
> no dce-terminal-timing-enable
> no frame-relay inverse-arp
> !
> interface Serial0/0.203 point-to-point
> frame-relay interface-dlci 231 ppp Virtual-Template1
> !
> interface Serial0/0.213 point-to-point
> frame-relay interface-dlci 241 ppp Virtual-Template1
> !
>
> interface Virtual-Template1
> no ip address
> ppp authentication chap
> ppp multilink
> ppp multilink group 1
>
> ===========================================================
>
> Rack1R3#sh ip int b
> Interface IP-Address OK? Method Status
> Protocol
> Ethernet0/0 156.1.3.3 YES manual up
> up
> Ethernet1/0 204.12.1.3 YES NVRAM administratively
> down down
> Serial2/0 unassigned YES manual up
> up
> Serial2/1 unassigned YES manual up
> up
> Serial2/2 163.1.13.3 YES NVRAM administratively
> down down
> Serial2/3 156.1.23.3 YES manual up
> up
> Multilink1 174.1.23.3 YES manual down
> down
> Virtual-Access1 unassigned YES unset up
> down
> Virtual-Template1 unassigned YES unset down
> down
> Virtual-Access2 unassigned YES unset up
> down
> Virtual-Access3 unassigned YES unset down
> down
> Loopback0 150.1.3.3 YES NVRAM up
> up
> Rack1R3#
>
> ==========================================================
>
> Rack1R2#sh ip int b
> Interface IP-Address OK? Method Status
> Protocol
> FastEthernet0/0 156.1.27.2 YES manual up
> up
> Serial0/0 unassigned YES manual up
> up
> Serial0/0.203 unassigned YES unset up
> up
> Serial0/0.213 unassigned YES unset up
> up
> Serial0/1 156.1.23.2 YES manual up
> up
> Multilink1 174.1.23.2 YES manual down
> down
> Virtual-Access1 unassigned YES unset up
> down
> Virtual-Template1 unassigned YES unset down
> down
> Virtual-Access2 unassigned YES unset up
> down
> Virtual-Access3 unassigned YES unset down
> down
> Loopback0 150.1.2.2 YES NVRAM up
> up
>
>
>
>
> ---------------------------------
> Finding fabulous fares is fun.
> Let Yahoo! FareChase search your favorite travel sites to find flight
> and hotel bargains.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
> ---------------------------------
> Bored stiff? Loosen up...
> Download and play hundreds of games for free on Yahoo! Games.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:52 ART