Re: L2 etherchannel between 2 differents catalyst

From: Uchil Perera (uchil.groupstudy@yahoo.com)
Date: Mon Mar 19 2007 - 14:19:39 ART

• Next message: Jim: "Re: Ethernet Ethertype values on CCO"
• Previous message: Scott Morris: "RE: IPexpert voice class for free."
• Maybe in reply to: Matt Netw: "L2 etherchannel between 2 differents catalyst"
• Next in thread: Ian Blaney: "Re: L2 etherchannel between 2 differents catalyst"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Matt,
   
  You cannot do this. Etherchannels should be point to point.
  The only way you can do this is to stack SW2 and SW3, hence will behave as one switch.
   
  Regards

Matt Netw <mattnetw@gmail.com> wrote:
  Hi GS,

it s possible make a L2 etherchannel between 1 catalyst in a end and 2
differents catalyst at other end?

SW1 have 2 fastether in l2 etherchannel, SW2 and SW3 only 1 fastehter each,
all switches with int vlan 100 and ip add 1.1.1.x, the port-channel
interface is UP, but there arent PING.

* SW2
*
*
SW1 *
*
*
* SW3

Any thought, thanks to all,

Matt.

• Next message: Jim: "Re: Ethernet Ethertype values on CCO"
• Previous message: Scott Morris: "RE: IPexpert voice class for free."
• Maybe in reply to: Matt Netw: "L2 etherchannel between 2 differents catalyst"
• Next in thread: Ian Blaney: "Re: L2 etherchannel between 2 differents catalyst"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:51 ART