From: Darby Weaver (darbyweaver@yahoo.com)
Date: Mon Mar 19 2007 - 06:04:42 ART
If you had created a local username and password you
could simply disconnet it and wait a bit an login
locally on those credentials.
But since you did not...
Might I recommend using a program like Solarwinds or
Kiwi and those SNMP WR strings you configured to make
some very quick work of this situation.
That should get you oy of the fire quickly enough.
Usually with a switch I'd just reboot and press the
mode button for about 30 seconds or so and in the then
just press the enter key and login with no credentials
- per Cisco's Website.
But since you have the Read/Write Strings
Hmmm...
In the future:
1. Create a local username and password.
2. Use the command reload in 5 and do not save your
config until you have tested it. I use another
session.
Hope this helps a bit.
Darby
--- John Matus <jmatus@pacbell.net> wrote:
> i made the mistake of copying and pasting a config
> into a new switch that we
> got @ work.
> after i saved the confige and tried to reload it it
> got to "hit enter to
> continue" and it just keeps cycling back to that
> line over and over and over
> "hit enter to continue" ......< or it it 'hit
> return to enter'> (it's late)
> anyhow, i can't seem to do password recovery on it
> b/c i can't get the the
> initial prompt to change it.
> here is my config.....HELP!!! how can i
> recover my switch and get it
> back to default settings????
>
> version 12.0
> no service pad
> service timestamps debug uptime
> service timestamps log uptime
> service password-encryption
> !
> hostname 3560
> !
> enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxx
>
> aaa new-model
> aaa group server tacacs+ TMM
> server 10.1.1.2
> server 10.1,13
> !
> aaa authentication login default group bosco line
> aaa authentication login CONSOLE line
> aaa authorization exec default group bosco none
> aaa accounting exec default start-stop group bosco
> aaa accounting commands 0 default start-stop group
> bosco
> aaa accounting commands 15 default start-stop group
> bosco
> !
> !
> !
> !
> !
> clock timezone pDT -8
> clock summer-time pDT recurring
> spanning-tree uplinkfast
> !
> ip subnet-zero
> ip domain-name candy.com
> ip name-server 10.1.1.50
> cluster enable candy 0
> cluster member 1 mac-address xxxx.xxxx.xxxx
> cluster member 2 mac-address xxxx.xxxx.xxxx
> cluster member 3 mac-address xxxx.xxxx.xxxx
> cluster member 4 mac-address xxxx.xxxx.xxxx
> cluster member 5 mac-address xxxx.xxxx.xxxx
> cluster member 6 mac-address xxxx.xxxx.xxxx
> !
> !
> !
> interface FastEthernet0/1
> !
> interface FastEthernet0/2
> !
> interface FastEthernet0/3
> !
> interface FastEthernet0/4
> !
> interface FastEthernet0/5
> !
> interface FastEthernet0/6
> !
> interface FastEthernet0/7
> !
> interface FastEthernet0/8
> !
> interface FastEthernet0/9
> !
> interface FastEthernet0/10
> !
> interface FastEthernet0/11
> !
> interface FastEthernet0/12
> !
> interface FastEthernet0/13
> spanning-tree portfast
> !
> interface FastEthernet0/14
> !
> interface FastEthernet0/15
> !
> interface FastEthernet0/16
> !
> interface FastEthernet0/17
> !
> interface FastEthernet0/18
> !
> interface FastEthernet0/19
> !
> interface FastEthernet0/20
> !
> interface FastEthernet0/21
> !
> interface FastEthernet0/22
> !
> interface FastEthernet0/23
> !
> interface FastEthernet0/24
> !
> interface FastEthernet0/25
> !
> interface FastEthernet0/26
> !
> interface FastEthernet0/27
> !
> interface FastEthernet0/28
> !
> interface FastEthernet0/29
> !
> interface FastEthernet0/30
> !
> interface FastEthernet0/31
> !
> interface FastEthernet0/32
> !
> interface FastEthernet0/33
> !
> interface FastEthernet0/34
> !
> interface FastEthernet0/35
> !
> interface FastEthernet0/36
> !
> interface FastEthernet0/37
> !
> interface FastEthernet0/38
> !
> interface FastEthernet0/39
> !
> interface FastEthernet0/40
> !
> interface FastEthernet0/41
> !
> interface FastEthernet0/42
> !
> interface FastEthernet0/43
> !
> interface FastEthernet0/44
> !
> interface FastEthernet0/45
> !
> interface FastEthernet0/46
> !
> interface FastEthernet0/47
> !
> interface FastEthernet0/48
> !
> interface GigabitEthernet0/1
> !
> interface GigabitEthernet0/2
> !
> interface VLAN1
> ip address 10.1.1.1 255.255.255.0
> no ip directed-broadcast
> ip nat outside
> !
> ip default-gateway 10.1.1.254
> ip nat inside source list 199 interface VLAN1
> overload
> access-list 199 dynamic Cluster-NAT permit ip any
> any
> snmp-server engineID local xxxxxxxxxxxxxxxxxxxx
> snmp-server community name RW
> snmp-server community name1 rw
> tacacs-server host 10.1.1.2
> tacacs-server host 10.1.1.3
> tacacs-server key whatever
> !
> line con 0
> transport input none
> stopbits 1
> line vty 0 4
> password 7 xxxxxxxxxxxx
> line vty 5 15
> password 7 xxxxxxxxxxxx
> !
> ntp clock-period 11259163
> ntp server 10.1.1.4
> end
>
>
> John D. Matus
> MCSE, CCNP
> Home (818) 782-2061
> Work (626) 568-7716
> Cell (818) 430-8372
> jmatus@pacbell.net
>
>
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:51 ART