From: Tandou Mohamed (dtandou@yahoo.com)
Date: Sun Mar 18 2007 - 17:21:40 ART
Ken,
  as soon as i added the two commands below on each  Virtual-Template1 it came up/up.
  Thanks man
   
  Mohamed
   
  R3
  interface Virtual-Template1
  ppp chap hostname R3
ppp chap password 0 CISCO
   
  R2
  interface Virtual-Template1
  ppp chap hostname R2
ppp chap password 0 CISCO
   
  ======================================================
   
  Rack1R3#sh ip int b
Interface                  IP-Address      OK? Method Status                Protocol
Ethernet0/0                156.1.3.3       YES manual up                    up      
Ethernet1/0                204.12.1.3      YES NVRAM  administratively down down    
Serial2/0                  unassigned      YES manual up                    up      
Serial2/1                  unassigned      YES manual up                    up      
Serial2/2                  163.1.13.3      YES NVRAM  administratively down down    
Serial2/3                  156.1.23.3      YES manual up                    up      
Multilink1                 174.1.23.3      YES manual up                    up      
Virtual-Access1            unassigned      YES unset  up                    up      
Virtual-Template1          unassigned      YES unset  down                  down    
Virtual-Access2            unassigned      YES unset  up                    up      
Virtual-Access3            unassigned      YES unset  down                  down    
Loopback0                  150.1.3.3       YES NVRAM  up                    up      
Rack1R3#
Rack1R3#ping 174.1.23.3 
  Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 174.1.23.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 88/91/100 ms
Rack1R3#
Rack1R3#ping 174.1.23.2 
  Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 174.1.23.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 44/46/48 ms
   
"Norton, Ken" <knorton@presidio.com> wrote:
  Mohamed,
Try taking off chap authentication to see if the interface comes up.
If the interface comes up then put chap back on and review your ppp
authentication. Based on the router names you may need to change your
usernames to reflect the hostnames for chap to work.
Thanks,
Ken
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tandou Mohamed
Sent: Sunday, March 18, 2007 3:34 PM
To: ccielab@groupstudy.com
Subject: PPP MULTILINK OVER FRAME RELAY
Hello GS,
i configured ppp multilink over frame relay my multilink interface is
down.i don't see anything wrong with the config. Can someone check my
config below and tell me what i am doing wrong? 
Thanks
Mohamed
Rack1R2#
username R3 password 0 CISCO
interface Multilink1
ip address 174.1.23.2 255.255.255.0
ppp multilink
ppp multilink group 1
!
!
interface Serial0/0
no ip address
encapsulation frame-relay
no dce-terminal-timing-enable
no frame-relay inverse-arp
!
interface Serial0/0.203 point-to-point
frame-relay interface-dlci 231 ppp Virtual-Template1
!
interface Serial0/0.213 point-to-point
frame-relay interface-dlci 241 ppp Virtual-Template1
!
interface Virtual-Template1 
no ip address
ppp authentication chap
ppp multilink
ppp multilink group 1
===========================
Rack1R3#
username R2 password 0 CISCO
interface Multilink1
ip address 174.1.23.2 255.255.255.0
ppp multilink
ppp multilink group 1
!
interface Serial0/0
no ip address
encapsulation frame-relay
no dce-terminal-timing-enable
no frame-relay inverse-arp
!
interface Serial0/0.203 point-to-point
frame-relay interface-dlci 231 ppp Virtual-Template1
!
interface Serial0/0.213 point-to-point
frame-relay interface-dlci 241 ppp Virtual-Template1
!
interface Virtual-Template1 
no ip address
ppp authentication chap
ppp multilink
ppp multilink group 1
===========================================================
Rack1R3#sh ip int b
Interface IP-Address OK? Method Status
Protocol
Ethernet0/0 156.1.3.3 YES manual up
up 
Ethernet1/0 204.12.1.3 YES NVRAM administratively
down down 
Serial2/0 unassigned YES manual up
up 
Serial2/1 unassigned YES manual up
up 
Serial2/2 163.1.13.3 YES NVRAM administratively
down down 
Serial2/3 156.1.23.3 YES manual up
up 
Multilink1 174.1.23.3 YES manual down
down 
Virtual-Access1 unassigned YES unset up
down 
Virtual-Template1 unassigned YES unset down
down 
Virtual-Access2 unassigned YES unset up
down 
Virtual-Access3 unassigned YES unset down
down 
Loopback0 150.1.3.3 YES NVRAM up
up 
Rack1R3#
==========================================================
Rack1R2#sh ip int b
Interface IP-Address OK? Method Status
Protocol
FastEthernet0/0 156.1.27.2 YES manual up
up 
Serial0/0 unassigned YES manual up
up 
Serial0/0.203 unassigned YES unset up
up 
Serial0/0.213 unassigned YES unset up
up 
Serial0/1 156.1.23.2 YES manual up
up 
Multilink1 174.1.23.2 YES manual down
down 
Virtual-Access1 unassigned YES unset up
down 
Virtual-Template1 unassigned YES unset down
down 
Virtual-Access2 unassigned YES unset up
down 
Virtual-Access3 unassigned YES unset down
down 
Loopback0 150.1.2.2 YES NVRAM up
up 
---------------------------------
Finding fabulous fares is fun.
Let Yahoo! FareChase search your favorite travel sites to find flight
and hotel bargains.
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:51 ART