RE: Multiple autocommands for a user

From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Fri Mar 16 2007 - 15:59:11 ART

• Next message: postmaster@traknet.com: "Delivery Status Notification (Failure)"
• Previous message: Filyurin, Yan: "RE: Vlan-map for ip and mac"
• Maybe in reply to: dagbo: "Multiple autocommands for a user"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

        Take a look at the "Embedded Event Manager (EEM) Scripting
Community". I'm not sure if this is new but I noticed it for the first
time yesterday linked from the CCIE page:
http://forums.cisco.com/eforum/servlet/EEM?page=main

HTH,

Brian McGahan, CCIE #8593 (R&S/SP)
bmcgahan@internetworkexpert.com

Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/

-----Original Message-----
From: dagbo [mailto:goddardtek@nc.rr.com]
Sent: Thursday, March 15, 2007 8:01 PM
To: Brian McGahan; CCIE Group
Subject: Re: Multiple autocommands for a user

Brian,

  Thanks! I was thinking a tclsh script might work, but the big piece I
couldn't figure out was how to get the script to stay with the router
through a reload. Here is what I figured out I can do:

1) create a text file called sho_commands.tcl that has the following in
it:
show run
show ver
show interfaces

2) tftp or ftp the tcl file to flash on the device

3) then on the device do this:

conf t
username dave pass cisco
username privilege level 15
username dave autocommand tclsh flash:sho_commands.tcl

This works! My only complaint is that I have to copy the tcl file from a

tftp or ftp server to the device - any ideas on how to get around that?

thanks!
Dave

----- Original Message -----
From: "Brian McGahan" <bmcgahan@internetworkexpert.com>
To: "dagbo" <goddardtek@nc.rr.com>; "CCIE Group"
<ccielab@groupstudy.com>
Sent: Thursday, March 15, 2007 4:19 PM
Subject: RE: Multiple autocommands for a user

You could write a tcl script that runs the show commands and
then have the autocommand call the tcl script when they login.

HTH,

Brian McGahan, CCIE #8593 (R&S/SP)
bmcgahan@internetworkexpert.com

Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
dagbo
Sent: Thursday, March 15, 2007 10:06 AM
To: CCIE Group
Subject: Multiple autocommands for a user

Hello group,

  is there anyway to have a local user account configured to do more
than one
single command upon logging in? My only other idea would be to offer a
menu
that allows for the different commands. For example, I'd like for when
user
dave logs in, to have the following commands be executed:

show start
show cdp neighbors
show interfaces

and then exit user dave back out of the device.

If I do this:

username dave pass cisco
username dave autocommand show start
username dave autocommand show ver

the "show ver" config overwrites the "show start" command. Any idea's?

thanks,
Dave

• Next message: postmaster@traknet.com: "Delivery Status Notification (Failure)"
• Previous message: Filyurin, Yan: "RE: Vlan-map for ip and mac"
• Maybe in reply to: dagbo: "Multiple autocommands for a user"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:51 ART