From: kuldip singh (dipa.singh@gmail.com)
Date: Thu Mar 15 2007 - 20:37:37 ART
Hi guys,
Some of you guys might already know this, but you can ping all the networks
from 3550 switches by creating macro as shown below.
Switch_2(config)#macro name ping
Enter macro commands one per line. End with the character '@'.
do ping 147.1.156.1
do ping 140.1.1.1
do ping 147.1.11.1
do ping 147.1.14.1
do ping 183.1.111.1
do ping 147.1.236.2
@
Switch_2(config)#
Switch_2(config)#int fa0/14
Switch_2(config-if)#macro apply ping
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 147.1.156.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 28/29/32 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 140.1.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 28/29/32 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 147.1.11.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 28/29/32 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 147.1.14.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 28/30/32 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 183.1.111.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 28/29/32 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 147.1.236.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 56/60/68 ms
Switch_2(config-if)#
regards.../dipa
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:51 ART